Quote of the moment: "no hesitation in using your company again
& recommending to friends." PW
GAS IT - "The OE brand that the
Manufacturers you know fit" - as standard
GAS IT:
We're extremely pleased
to offer the amazing Gasit range of refillable LPG systems. Gas-it's
amazing value has already turned it into one of our best sellers!
Why us? We're
motorhomers ourselves and long term refillable users all round
Europe for many years - we really do understand motorhomers' gas needs and problems
here and abroad! Why refillables?
For delightfully easy gas management especially abroad where several
different fitting types are used on exchange bottles.
But also say goodbye to all that one-empty-for-exchange nonsense and
also goodbye to lugging heavy gas bottles around.
How are they different? Mostly
by having a second completely separate hose system to effect the fill;
also a different output connector for pigtails - '21.8LH Nut'
or '109 Nut'.
New: UK Easyfill 6kg and 11kg in both Sky and Horizon versions
now available as below.
GASIT Refillable Gas Bottles and Gas
Tanks are factory fitted by several Motorhome manufacturers in the UK, these
identical parts are available directly to our motorhome, campervan &
motorcaravan customers. Names you'll know are Autosleepers, Autotrail,
Elddis, IH, WildAx, Moto-Trek, Shire & even Tesco! Typical components
are pictured above right but other
options are available too. Notable markets served by Gasit
products include: Motorhomes, Campers, Caravans, Horseboxes, Corporate
Hospitality Trailers, Catering Trailers, Farriers, Forklift and Road Repair
machinery. Gasit are also NCC & UKLPG members.
A great range of products from a very
competent and successful company. We're particularly impressed by three things;
their incredible range of ancillary products allowing almost any
configuration for a legal
installation; their full understanding of the many
technical and legal issues not only in the UK but across Europe too; plus their sensibly keen
pricing. All this and underslung tanks too - an extra refillables range that we hope to introduce
quite soon.
To
get started we're offering the most popular products largely based
on kits but can already supply anything from the GAS IT range. Do email us if you have specific needs
not listed here and/or
if you want help designing a system - we'll ask for photos of what you
have installed now to be sure we can advise properly. We do have lots of
experience here - more than 20 years motorhoming and nearly 15 years
using refillables / Autogas all round the UK / Ireland and Europe plus
many years selling our Gaslow
systems - which are still great products but different to the excellent
value systems on offer here.
The white fill box illustrated above is the 'super' version and costs
more than the standard black one included in the kits; that black one
can be painted with plastic paint - to match other fittings or bodywork.
"Just to let you know that the installation is a
great success. Just been to Europe for 5 weeks and topped up the
gas bottle a couple of times without any problem. Having a refillable
system with abundant refill stations takes all the worry out of using
gas and, as we can run the fridge on it, means we do not really care if
we have electricity available or not. Now considering if I need the
"spare" 6Kg bottle at all. MS.
NB: Refillable bottles take screw-on 21.8LH Nut
pigtails / regs - not screw-in bullnose POL-propane!
Adapters and replacement pigtails are available below - e.g. '21.8LH Nut
- POL Adapter' (ACCS-024)(0001).
The 11Kg and 6Kg Standard Cylinders both have clip-on* readout Gauges, JIC inlet and
21.8LH outlets as many will be familiar with on Gaslow & Caratank
products - in fact they are fully compatible with those systems you can
even mix and match if you wish (however these are all direct ship items
so please create separate Gasit & Gaslow orders). The usual safety elements are in place
including 80% content control and hoses fully approved to the EU & UK
E67.01 regulation - and you even get a free gas leak detection spray
with twin systems to
assist with installation and ongoing maintenance.
* These gauges are much easier to read than the top mounted ones
but do read from 50% down to the 15% reserve not 100% to 0% as many
expect! Gaslow had
quite a few problems with these gauges but Gas-IT say about their clip-on gauge system
"In
the past some gauges have proven to be problematic, so we now test
every single one here in house before fitment and also run it through
some further
tests after fitting, as a result our gauge problems have reduced to less
than 0.1% (1:1000) failure rate at customers", good news!
There are also ways of improving progressive gauge function by moving
the gauge body along the brass towards the red dustcap, we can email
customers a help sheet on request.
Some delivery info: Assembled cylinders are normally delivered in cartons often with
other bagged components added in to the box. Gauges come in a small bag
often 'Sellotaped' to the inside of the carton usually on the underside
of the lid - don't lose them! Documents are also enclosed. The
cylinders themselves are stamped with their gross 'water' capacity so
the 11Kg might be stamped 26.8L e.g.
Avoiding gauge jams: Cylinders are designed to be used
upright but carriers aren't really interested in this do you may receive
a cylinder that has been bounced around on its side and this can lead to
initial or later jamming of the float mechanism. There is a pre-install
procedure to reset and initiate the float mechanism, it is important to
carry out both steps (rocking and pressure release) before
you fully install & fill!
(Download)
6Kg Spec: Approx 12.5 litres (at 80%);
470mm H x 246mm dia. Empty Weight: ~7 Kg. 11Kg Spec: Approx 21.2 litres (at 80%); 550mm H x 304mm dia. Empty
Weight: 10.7 Kg approx. Remember the bottle has to go through the
cupboard door / frame aperture as well as fit in the cupboard!
The '550mm' includes a few mm top clearance to open the tap. The 4-hole is
taller at 580mm but the collar unbolts to make it similar to the
standard version. Following a recent question we can say the 11Kg
cylinder shoulder is at about 390mm and the rapidly reducing diameter
above disappears to almost nothing where the valves are fitted at
~470mm, these measurements were taken under difficult conditions so all
are 'approx'.
Certificates? In line with EU LPG bottle regulations, each
GAS IT bottle is stamped at the base with all the required UK & EU
approval details on it, including manufacture date and unique serial
numbers; all this is done on the bottle manufacturers production line and
so no paper certificate is now supplied with bottles.
The Gasit PLUS 4-Hole Cylinders have built in top gauges - like the new Gaslow
but a lot larger and easier to read - and with a whole host of other features too, including an excess flow valve
and liquid phase separator so fully useable on the move without the need
for Secumotion type hoses. There are other in-motion issues though, e.g.
any gas exhaust needs to have been designed for in-motion use, our own
in-motion heating exhausts out through the roof. For most of us it is the improved
accuracy gauge and the possibility of adding a remote readout that appeals.
Do note though: a) The more accurate gauge is a little awkward to read once
installed in a cupboard, I use a mirror & torch & reading glasses on
mine! b) The remote readout has to be wired into and around the
'van, easy as OEM but not so east as a retro-fit. Plus cylinder top pic
above right, most of our customers unbolt the collar for easier access.
Tanks? Yes great solution for some but definitely not for
all. There are extra and special regulations for the crash-resistant
security of the fitting that are not easy to comply with DIY. All that
adds weight too and the whole thing is liable to corrosion due to
position and difficulty of inspection. Probably best for DIY
converters, there are good vehicle-dedicated kits for installing these
at an early stage.
R67? There is more to the R67 specification than just the
tanks or cylinders and I'm told there is a requirement for all R67
installations to be heavily restrained with crash-resistant steel
straps - just as if they were installed tanks in fact. OEM* Gasit cylinder supply meets the R67 requirements but when
the same cylinders/bottles are supplied to the aftermarket they
are certified as gas bottles not as R67 gas cylinders - this
means normal bottle straps / restraints can be used by our customers. Newer
Gaslow Brand refillable bottles are all R67 certified and this
might
cause complications for non-OEM or DIY fitting depnding on how you
interpret the R67 regs. *OEM = Original
Equipment Manufacturer or Vehicle Builder.
German import? With hand tightened pigtails? No
problem, keep the existing German pigtail/s (often Secumotion) and
connect them to the refillable outlet/s via our new 'UK 21.8LH to German
21.8LH Adapter', this connects a German-Pigtail onto Gas-it Refillable
and is found near the bottom of this page.
Fill Hoses & Pigtails: Gas-it prefer the rubber 'hydraulic' style fill hoses for
their systems and they are "fully Approved to E67.01 which is a EU and
UK regulation".
Fill lengths of 0.5m to 3.0m are available in one piece and longer with a
coupler or through-bulkhead coupler. Refillables companies use exactly the same
'JIC' fitting
system for filling so Gaslow and Gas-it fill hoses are fully
interchangeable, as are the 21.8LH-NUT output hoses or 'pigtails'. If you want
stainless braided on a Gasit system there's no problem mixing the two
brands but you do have to create separate Gasit & Gaslow orders for
logistical reasons. In pigtails the 21.8LH screw-on Nut for refillables is also called Butane Nut (as used on the UK Butane
dumpy bottles) and as 109 Nut in UK. You can reuse screw-in POL pigtails and POL
regulators by adding our 21.8LH to POL Adapter found in the shopping
listings below. Info: Fill hoses (only) use a metal-to-metal seal, no washers are
supplied or needed for these on either brand.
Stainless Steel Hoses & Oiling & Filters? It is now known that all bottled
gas and refillable LPG (Autogas) can and often does contain oily/waxy material in the gas
itself - so suspicion has largely been lifted from the rubber hoses as the
source. As a result
we now recommend fitting in-line gas filters in all installations and
strongly recommend it whenever the wall regulator isn't situated well above the
height of the bottle outlets. Truma have always maintained that "the
problem lies with the LPG itself and there continue to be instances
where, despite best practice and even stainless-steel pigtails,
regulators have still been damaged".
Damaged regulators and the possibly
contaminated system beyond them can be very expensive to fix - so be
warned! The new DGI accessory fill filters below
could well be a viable alternative to that adding protection from grit
ingress too - albeit they are a lot less convenient in use than the
in-line installed items as the RH example pictured right. A footnote on stainless steel hoses: originally
sold to minimise regulator oiling they have an internal plastic tube
in place of the rubber and some
in the industry have concerns over the fire resistance of these.
In-Line Filters in both Refillables and POL Fitting: There used to be concern about oils coming
out of rubber hoses and this was supported by Calor denying there were
contaminants in the gas itself but this Gasit
customer feedback may give you a different view: "I've had one of these
(Gasit) filters on my gas bottle inside my heater for about a month and
i thought i'd look inside it today to see how what it was like inside.
There is lots of staining from the gas and already there's a smelly oil
in the body of the metal filter. i've only ever used Calor gas for my
gas bottles and this rubbish was clearly going in to the heater or
regulator (before). Glad i bought this filter!" This
does fit well alongside Truma's statement that "the
problem lies with the LPG itself and there continue to be instances
where, despite best practice and stainless-steel pigtails, their
regulators have still been damaged". Truma probably make the best
in-line filter albeit at a price! Our RH Filter unit pictured
above right
- it doesn't necessarily mean for RH bottle because your own arrangement
of cylinder position and orientation, cupboard limitations and pigtail routing
from filter to regulator will all determine which hand is best for you -
it is always
worth visualising it all in cupboard to work this one out! Fits on
the bottle outlet and three
versions are available - Straight/LH/RH. NB: The gas bottle outlet
normally points to the right on each Gasit bottle in order to display the
front mounted gauge clearly to the user and this may determine which
hand filter is best for you. The outlet is also close to the edge of
the bottle so an angled filter is normally used on bottles for
compactness, LH to send the pigtail away behind the bottle or RH to
bring the pigtail forwards from the bottle, the best choice depends on
where the regulator sits in relation to the/each bottle and how the
pigtail will curve round and up to the regulator. There are other filter brands too but
this Gasit replaceable-element in-line filter is excellent value.
New: A W20 fit filter for connecting to the regulator rather than
the bottle/s - it sits between bulkhead regulator and pigtail so works
with Refillable and/or Calor pigtails. Filters
should be used horizontally so you may need to add a W20 Elbow to
the bulkhead regulator to
get that horizontal connection? It's slightly more complicated for
twin bottles, you can either fit one on each side of the reg/change-over
or add a W20-Tee to offer twin pigtail inlets to take both bottle
pigtails, this would then be a simple manual change-over (with bottles on/off at the
taps).
NB:
The bottle outlet and gauge orientation is fixed, so with the bottle
facing the viewer to display the level check gauge the bottle outlet faces right
and is also close to the edge of the bottle – for this reason LH
or RH filters are normally chosen for compactness. You might need quite a lot of space
off to the right to use a straight filter
with a relatively stiff slow-bending pigtail.
Excellent New
Product:
Gasit Fill-Filters: used along with existing fill
adapters these new budget external filters will remove any muck or dirt from the
LPG
before it can get into your tank/cylinder. Available just as a Filter
unit or as a GDI Filter + UK Bayonet Extension set (pictured left), or as part
of a Euro-UK Adapter kit (pictured right). For use the filter is first fitted
(spannered*) onto the back of any of the various standard adapters
including the UK Bayonet so a great addition to almost any refillables kit.
Plainly if you have a fixed UK fill point you will need another loose UK
Bayonet, as in some kits, to assemble to the filter, that assembly is
then screwed onto the fixed point in exactly the same way that a 'foreign'
adapter would be.
Simplest choices: If you have a fixed UK fill point buy the 'UK-Extn
Filter Kit' : For a removable fill head system buy just the 'Filter for
Adapter'. For Europe buy a multi-part set to cover the countries needed. Most convenient of all though is a fixed in-line filter. Click here to go straight to filters
shopping below >>>
Changing-over:
On newer systems with an on-wall regulator and with refillable bottles
fixed in place for up to 15 years it is madness to repeatedly make and
break gas-tight joints just to swap from empty to full and back again.
It is far better to leave the joints alone and to have a change-over.
These range from fully automatic units with indicators like the set pictured right right, down to a cheap W20 T-piece with NR Valves
for
permanent connection of two pigtails to the regulator, so then just turn the bottles
on and off at their taps as needed.
New:
For pre-2004 systems: A) a POL-out wall mounted
Manifold-T pictured right, this allows two cylinders to be connected via
modern pigtails but connected to the motorhome via an existing
bull-nosed propane regulator i.e. an older pre-2004 style on-bottle
type. The inlets accept standard Propane or Refillable
cylinder pigtails or even a mix of the two - handy where a backup Calor is kept
alongside a refillable for example. Two x W20 male-in to POL Propane
female-out, wall mounting plate and importantly for mixed or 'Calor'
systems it comes with NRVs - a quality item. Change-over is manual at the bottles, just
turn them on & off individually. B) an on-wall 37mbar Cavagna
Regulator that will accept a change-over head, see regs listings far
below. C) we can now offer a POL to
German converter so usable on older imports too!
Kits:
Gasit 11kg Refillable Kits and 6kg single and twin refillable kits are available both as standard items and also made
up with variations to suit you and/or your vehicle - all very handy
because there can be different requirements on both input and output
sides. GAS IT offer a wider range of fill points than Gaslow - including
the removable type and a different style of in-locker kit - so there
are some extra choices there. Also a wide range of hose length options on both
input and output so even more choice. On the output side there are a surprising number of
differences across vehicles; pre/post 2004 regulators on-bottle or
on-wall; Secumotion type; imports like Triomatic, even 50mbar type; 21.8LH or
UK POL bottle
connections; Horizontal or Vertical regulators installed high or fairly
low; the list goes on. Send us pictures of what you have installed now
along with likely filler locations and we'll
advise on what you need to connect up easily & legally & safely plus any
options you might have. Pictures are by far the best route and prevent
any common misunderstandings that can occur on the telephone! Example Twin in-Locker kit
pictured right.
Useful & Cheap Widgets that most people forget! 1)
Filler Elbow, if needed, turns a hose at right angles immediately behind the fill
head, Gasit offer built-in horizontal fill elbows too and these often make hose routing and securing so much easier.
You can add an angled hose to get a vertical or 45 degree exit too. Unsecured
'dancing' hoses
may leak in time, so do route and secure/clip them
properly! 2) W20 T-piece right, the simplest manual change-over that eliminates 'spannering'
and works with all/mixed pigtails. It is bonkers to keep breaking a vital
10-year gas-tight joint in a twin or mixed system when you can add this cheap widget and
keep both pigtails permanently connected to the regulator and just
open/close the bottles and change if needed and/or appropriate at the
bottle/Calor end of the pigtail - as
intended! Using this system it is also possible to use a single
Truma filter unit.
3) Elbows to turn hoses quickly, three types exist -
21.8LH at the refillable bottle, W20 at the regulator/change-over and JIC at
fillpoints. They are great problem solvers in tight spaces.
4) Through-bulkhead JIC connector, a neat and easily sealable inlet
hose widget to enable a pass-through the gas locker wall with a standard
fill hose attached either side - chafe free. Goes through a 20mm hole
and fits bulkheads up to 15mm thick max. 5) New: German system adapters.
6) For BBQs we recommend an external BBQ point delivering pre-regulated
gas like the Bullfinch but we can also supply the Gasit in-locker kit
with tee, 8/10mm thermoplastic pipe & clips & mountable gas tap with
quick-release nozzle. NB: Both these BBQ accessories fit both refillable
and exchange gas systems by tapping into the already installed low
pressure gas pipes.
Fill Points:This is an area that seems to cause confusion -
there are three types, the 'Remote' pot type, the compact 'Removable'
type (straight example shown left) where all travel adapters are removable including the
supplied UK one and finally the
'Locker' type with supplied bracket & cover. All do exactly the same job
and fit the same hoses, elbows, etc., it is just suitability for
location that determines the choice. The Remote
fill heads come with a round recessed mounting box in black or white
painted similar to Gaslow and these require a 70mm hole (70+86 in
thicker walls), The small neat
version without a recessed box is the 'Removable' fillhead* version
supplied with a cover flap and requiring a 29/30mm hole to mount; it is
the metal fill-adapter part that is removable. Both types can be used through
the vehicle wall or skirt, in both types the metal part of the fill head
beyond the flange goes in a
28-30mm
hole with four 6mm bolt holes around it; these are provided in the
Remote fill box but plainly you need to make these yourself on a
removable head fitted though the vehicle skirt for example, the supplied
plastic cap assembly covers any small mismatch.
The in 'Locker' type is also based on the metal fill-head pictured right
but comes with a slightly different cover cap plus a mounting bracket of
course. This GAS-IT Locker heads & brackets are fully legal and approved
for use in UK and EU but you still may be refused service at some
stations in parts of
Europe if attempting to fill in-cupboard; these bans are an
attempt to control banned direct-on-bottle filling that might be
concealed in the cupboard. It is pretty much impossible to explain the
difference to untrained garage staff in a foreign language so our own recommendation is to
install an exterior fill point, it is what we have ourselves and will
save a lot of time and hassle once installed!
Gasit advise: When positioning any LPG Fill point try to avoid placing
within 500mm of a opening window, vent, vehicle exhaust or appliance
flue. Do not door mount fill point.
All fill points are available
with a built-in elbow or in a straight version, we normally offer the
most popular type for the head style but will swap on request. Common
exterior fill-point locations include the vehicle skirt and
through the vehicle body from within or near to the gas cupboard but
through the gas door can lead to hose damage and is frowned upon. In all cases the
filling arrangement must be completely sealed off from the inside living
quarters and with a degree of fire resistance, this is easy enough to achieve
keeping the fill hose in locker and just taking it out to the outside through the gas locker floor where there are
already vent holes by law. Our through-bulkhead connector can be useful
to take fill hoses out through the gas locker wall or a thin
floor - with fill hoses then either side of course so two short ones are
then needed - the second hose must still be outside the habitation box
or completely sealed of course but a very neat solution where
appropriate. If it isn't possible to keep the filler assemblies inside
the locker and/or outside the habitation box then decent sealed off,
boxing-in of the hose and filler is needed.
Removable here refers to the outer gas filling connector/head
which unscrews to leave a neat low-profile dust-capped install and with
a smaller back depth too in the case of angled head plus angled hose. In the
Removable head
even the UK connector unscrews and is stored elsewhere until needed,
an ideal filler in tight locations, and one we use ourselves, see the pictures
of all types just below.
Filler Orientation:
Regulations say the UK bayonet should be fitted with the pins horizontal
for "continuity in layout for end users filling up". See
picture above to see this
orientation where the angled point hose then heads off sideways. To
comply with the regs you can rotate the fitting 180 degrees but not 90
degrees. If you need
a vertical hose exit just use a straight or angled point plus a 'Straight/Angled' fill hose or a JIC
Elbow. A simple sketch of your planned installation can help you
envisage it all connects!
Rear Clearances: Sometimes asked about for both Removable & Remote
fill heads, it varies as follows here • Straight
Removable plus angled Hose end, 100mm approx • Angled
Removable plus the Straight/Angled Hose nut, 60mm approx
• Angled Remote 70mm body mounted box and
bayonet, 85mm approx. So Angled+Angled gives the smallest back dimension
but do also take note of the orientation issue just above.
Some Example Fillers pictured below ...
ANGLED REMOTE FILL
LOCATED IN FILL BOX
ANGLED REMOVABLE FILL SMALL NEAT EXTERIOR
STRAIGHT REMOVABLE FILL DUST-CAPPED EXTERIOR
DUST CAP COVER
IN LOCKER FILL KIT
HOSE & DUST CAP
Fill-Box fitting: There are slight differences between fitting
into a thin panel like a skirt or van skin of <5mm and a thicker insulated motorhome
panel of maybe 25-35mm. The thin panel needs just a 70mm diameter hole
but the insulated panel needs a 70mm dia hole on the outside plus an
86/90mm rebated hole on the inside. This is to take the fillbox sleeve that
protects the vehicle insulation from the small but regular puffs of escaped of
gas at the end of each filling. Take care with the internal hole not to
go straight through with a power tool!
The main part of the interior drilling is often through soft foam so best to
drill through the inner wall then finish off by hand, you could even use
your fingers for the last more delicate bit! The two parts are
joined together with 6(?) self tapping screws applied from outside, i.e.
from inside the fill box. There are some short but informative
Gas-it videos on YouTube on several different topics including this
one - here
https://www.youtube.com/watch?v=HRHNFvUvZXs.
Revised 2018 pricing now developing below. We think we've got this
right but if you know different please email us with the details and
we'll see if we can match or even beat it! Click here to:
Not working? just use this address ... info at motorcaravanning co uk
Instructions: We make up these kits as required and are able to
adapt them to suit different circumstances like removable fill points,
German imports, older reg-on-bottle systems, etc. As a result they are
not pre-packaged with instructions. Fortunately the system is simple and
even has different fittings for the input and output side so it is hard
to go astray! Nevertheless we think it will be useful to you to
offer some example instructions that you can download here, instructions
courtesy of Gas-IT/FES Autogas. Do also see Gas IT's youtube videos. They are necessarily clear examples
rather than exact details of your particular kit and will also caution
against proceeding if you have little understanding of the need for gas
safety but we believe they are still truly useful visual guides to the
system. We do assume that you are capable of changing gas cylinders and
so familiar with the need to check for joint and bottle security as best
practice and also for any leaks. Please note that in 'studio' mock-ups
fillers may not always be shown fully mounted and fixed in place - but
they must always be permanently and securely fixed in practice.
Links are to PDF files in a new window. If needed you can download the
free reader at
www.adobe.co.uk
Despatch: These are technical products with each order put together for
individual customers so we aim for despatch next day rather than same
day. Sometimes delays occur so you should allow for 3-4 days for
delivery. When Express is added a 24hr carrier will be used and we get
the order out as soon as possible.
General
Filling
Info: Can I get a cheap refill and where??
Yes - running costs are much cheaper than
buying in the usual exchangeable/rental bottles, and there's no premium for
buying small amounts either - a big contrast to 'Calor' where in recent
years bottled Calor has been at least 50% dearer than Autogas and
bottled gas gets dearer per litre the smaller the bottle you buy!
With a
refillable Autogas system you can refill
or simply top-up cheaply at over 1400UK Garages -
see
www.drivelpg.co.uk/i-have-lpg/where-can-i-purchase-fuel/
for
refilling in your area of the UK. This is also a great source of info on
how to refill.
There are other useful guides too from Flogas, Calor, etcke
http://www.filllpg.co.uk/map along with their downloadable POIs.
You can
buy an annual printed maps, sometimes even from a local garage but thse
are often brand specific. POI downloads for your TomTom
or Garmin can be very useful indeed. None
seem to be really complete though, our local Flogas depot isn't on the
web maps for example.
European guides are available too,
www.mylpg.eu/stations/ is popular for stations from Norway to Turkey and
beyond, as is
http://ilpga.ie/autogas-outlets.php for Ireland. For Spain
including both the new smartphone App and a map based search see
http://tinyurl.com/lpgspain. LPG used to be hard to find in Spain partly
because it was often just on depots and commercial premises
rather than in roadside garages but there are now 100s of Repsol refilling
points available. As a result LPG is fairly common in fuel stations in higher
traffic areas throughout Iberia now, e.g. at more than 300 Portuguese and
more than 400 Spanish locations according to 'mylpg.eu' & aoglp.com. The Calor Gas
website in Southern Ireland says Autogas is not available there.
"... on our recent trip through France, Belgium, Netherlands, Germany,
Czech Republic, Poland, Slovakia, Bulgaria, Romania, Turkey, Cyprus,
gas was available everywhere ... I think you would be pretty unlucky not
to be able to find a filling station". (and/or small gas depot as in Turkey
and parts of Spain).
Recent news flash from mylpg.eu - "added a new functionality that can
help you pinpoint stations at a target location. On
http://www.mylpg.eu/stations/search you can submit a
place/town/city and it will show you the stations around it. Advanced
Search allows changing search radius and to filter only the stations
confirmed in the last 3 or 12 months and/or stations that got
a price for LPG in the last 3 or 12 months".
Europe - Fill Adapters: To travel widely in Europe you'll need all three
fill adapters as well as your standard
supplied UK fitting. The New Euronozzle adapter now being introduced in Southern Europe,
especially Spain, is
supposed to replace all the others but history says it won't - it will
just add yet another variant to the mix!
A) Claw-gun Cup-type filler adaptor, 'French';
Found in France, Italy, Austria,
Sweden, Portugal, Spain, Greece, Scandinavia, Turkey, and many eastern European countries:
B) Acme Screw-type filler adaptor. 'German' /
'Euro'; Found in Ireland, Belgium, Germany, Austria
again, Luxembourg &
Netherlands:
C) New
quick release filler adapter, 'Euronozzel'; Found in
parts of Spain
initially near Malaga but spreading now and also in Switzerland. It may appear
anywhere on new equipment even including UK.
But life is never that simple! ...
For example we know that the UK Bayonet type gun has been seen in
Spain and is fairly common in both the Netherlands (Holland) and Switzerland. Other variants may be possible too
including the new Euronozzle almost anywhere! We carry all three
plus UK bayonet & have used all.
Can't I refill my ordinary bottle with Autogas? No!
It is possible to concoct such adapters but this is not permitted with
rented exchange bottles like Calor and Flogas and more importantly doing
so would plainly be hazardous - so much so that you could end up in
court for breaches of legislation. Both Calor and Flogas have said they take a zero tolerance
approach to this and so plainly garages must too - if they want to stay in
business. This rare and dangerous practice has led to refusal to
allow in-cupboard filling on forecourts; they can't see what
you're doing and with what equipment so understandably many have decided
to just to ban it - this ban is still patchy but definitely spreading.
Can I
use a portable refillable at home and refill it at my local garage?Well
no not usually - user refilling of loose bottles is not permitted
as indicated by the sign seen on most Autogas pumps as pictured right. It might be
possible if you can find an LPG depot that will refill for you, at a
suitable price?? Gaslow
list a few UK-only filling points that will refill loose refillable
bottles. The
general rule for user-refilling is only via 'fixed bottle plus
fixed filler head and filling system'.
STAKO: The Gasit systems supplied by us are based on the
renowned Stako tanks and Gasit are "Stako's Only UK Factory Direct
Supplier of refillable bottles".
Buy on our secure server - UK & Ireland cards only. Prices include VAT.
Special offer - Std PP Over £100 FREE : £4.95 &
£5.95 to £100. Oversize/weight charges still apply
Is it still safe to buy from us in these turbulent times? Yes it
certainly is, we are well placed as a low overhead business and will still
be here to serve you this year and next with great but not stupid
prices!
Three ways
to pay; using a PayPal account login, or direct from your credit-debit
card on-line, or by phone
If you don't get on with PayPal you can also checkout using your bank card see our checkout FAQ.
You can
delete items in your shopping basket later so you can 'add' just to reserve
a choice of items.
Secure?
Yes, clicking on an Add to Basket button takes you to a certificated
secure shopping page
We believe these are great deals but if you know of better
- email us with the detail and we'll try to better!
GAS-IT Refillable LPG Systems
All prices include VAT
Some modest price increases in 2017/8 - but
still cheaper than our competitors 'sale' prices especially with our
free standard carriage offer on all orders over £100!
Express & Export Delivery Options
- for most products, click 'Add to cart' if required.
Option - £8.00
Express/ Rush Delivery Supplement -
add -
Carrier will be overnight but despatch could
still be delayed by up to 2 days
Option - £16.00
Gas-it System Scotland Delivery Supplement
Postcodes AB, DD, FK, IV, KW, PA, PH
For Gas-it order only, pls don't mix with other brands
Also covers oddments to Europe - like adapters
Option - £35.00
Scottish Islands : Isle of Wight : Isle of Man :
Northern Ireland, Ireland (Eire). Single system estimate.
For Gas-it order only, pls don't mix with other brands
Option - £55.00
Scottish Islands : Isle of Wight : Isle of Man :
Northern Ireland, Ireland (Eire). Twin system estimate.
For Gas-it order only, pls don't mix with other brands
NEW: GAS-IT EASYFill Bottles
Anything
greyed-out
is out of stock
Introductory offers, these are net - no
cashback or other offer applies to Easyfill.
Please note outlets are 21.8LH Nut not
POL Propane Bullnose - may need an adapter or new pigtail?
For delivery to Highlands or into Europe please
use the add-to-cart items at the bottom of the page.
Part No:
Description
Prices/Options
SKY VERSION
Gasit 6Kg EASYFill - SKY (Vertical Filler)
Easy to use, saves you money, super convenient to use and fill,
complete with LPG Gas Locker Sticker and Level Indicator plus our
introductory free POL adapter for the outlet so you can reuse an
existing UK POL reg or pigtail.
HORIZON VERSION
Gasit 6Kg EASYFill - HORIZON (Horizontal Filler)
Easy to use, saves you money, super convenient to use and fill,
complete with LPG Gas Locker Sticker and Level Indicator plus our
introductory free POL adapter for the outlet so you can reuse an
existing UK POL reg or pigtail.
SKY VERSION
Gasit 11Kg EASYFill - SKY (Vertical Filler)
Easy to use, saves you money, super convenient to use and fill,
complete with LPG Gas Locker Sticker and Level Indicator plus our
introductory free POL adapter for the outlet so you can reuse an
existing UK POL reg or pigtail.
HORIZON VERSION
Gasit 11Kg EASYFill - HORIZON (Horizontal Filler)
Easy to use, saves you money, super convenient to use and fill,
complete with LPG Gas Locker Sticker and Level Indicator plus our
introductory free POL adapter for the outlet so you can reuse an
existing UK POL reg or pigtail.
GAS-IT Bottle Kits
Add-to-cart add-ons are further
below. Anything
greyed-out
is out of stock
Please note outlets are 21.8LH Nut not
POL Propane Bullnose - may need an adapter or new pigtail?
For delivery to Highlands or into Europe please
use the add-to-cart items at the bottom of the page.
Online orders over £100 value come with free
standard carriage! A very few items have oversize charges as/where
indicated. All addresses outside the UK standard delivery zone
will always carry extra costs.
Part No:
Description
Prices/Options
NB: While many items are Gaslow compatible we must treat the two product
ranges separately, so if you want to mix them please create two
orders yourself, one for Gaslow products one for Gasit products. * All Gasit
is delivered direct from their warehouse so orders here must be for Gasit
products only *
For 4-Hole Plus
Cylinders please use the Kit Upgrade options at the bottom of this first
section
Leak Spray Pen
GAS Leak Detection Spray Pen
Handy fine spray pen comes with 10ml of MOT specification Leak detection
spray. Enough for several joints/tests, ideal for tool box can be used for
testing pigtail changes. Non Staining and Non Corrosive for Brass and is
designed to show the smallest of leaks. Only with Gasit systems.
Hose Upgrade
Angled Fill Hose Upgrade for any Gasit Refillable Kit
Supply the kit fill hose with 1x angled and 1x straight end in place
of the all-straight standard version. Can be used to change hose
positioning/direction say at the cylinder elbow or even on an angled
filler to turn the hose to the vertical Only valid as an upgrade to any Gasit
cylinder/s kit below.
Super White Fill-head -
UPGRADE(FP-015-W UP)
Please note this is a kit upgrade price and
is only for the Remote Kits
below.
Also
see Remote Fill Head Complete
below.
Gas-it Single Kits: 6Kgs &
11Kgs: Premium Kits? - Add a pigtail of
choice and a sticker maybe, we're still cheaper than 'Premium'
elsewhere!
Single 6Kg
Remote
GAS IT Single 6kg Refillable & Remote Fill Kit
This 6kg Refillable gas bottle with contents gauge & Remote Fill-point
kit is an easy low budget way to get into refillables. Comes complete
with remote fill-point and black fill-box and OEM specification fill
hose. Fill hose choices are offered right
Other cost options? Leak Spray, 21.8LH Pigtail to connect to your regulator, or a POL-Butane adaptor to re-use an existing Propane pigtail or on-bottle
POL regulator, Filter. White 'super' fill point upgrade in place of the standard black.
Order any of these extras below.
Single 6Kg
Remove
GAS IT Single 6kg Refillable & Removable Fill Kit
This 6kg Refillable gas bottle with contents gauge & Removable Black Fill-point
kit is an easy low budget way to get into refillables. Comes complete
with Removable fill-point in straight (default) (or angled on
request) with UK head and OEM
spec fill
hose. Fill hose choices are as offered right >
Other cost options? Leak Spray,
21.8LH Pigtail to connect to your regulator,
or a POL-Butane adaptor to re-use an existing Propane pigtail or
on-bottle POL regulator, Filter.
Order any of these extras below.
Single 6Kg
Locker
GAS IT Single 6kg Refillable & Locker Fill 'Easyfit' Kit
This 6kg Refillable gas bottle with contents gauge & Locker-Bracket Fill
kit is an easy low budget way to get into refillables. Comes complete
with angled bracket & filler head & OEM
specification fill hose. May come with the 'angled' on the fill head or
the hose end, please ask if you need one in particular. Fill hose normally 0.75m but also 1m
option right > Longer hoses are not normally need in-locker but
possibly used for under floor mount.
No cost option? Straight Bracket on request?
Other cost options? Leak Spray,
21.8LH Pigtail to connect to your regulator,
or a POL-Butane adaptor to re-use an existing Propane pigtail or
on-bottle POL regulator, Filter.
Order any of these extras below.
Single 11Kg
Remote
GAS IT Single 11kg Refillable & Remote Fill Kit
This 11kg
Refillable gas bottle with contents gauge & Remote Fill-point kit is an
easy lower budget way to get into refillables. Comes complete with remote fill-point and black fill-box and OEM
specification fill hose. Option: removable fill point head & cap in
place of the recessed remote. Fill hose choices are as offered right >
Other cost options? Leak Spray,
21.8LH Pigtail to connect to your regulator,
or a POL-Butane adaptor to re-use an existing Propane pigtail or
on-bottle POL regulator, Filter. White
'super' fill point upgrade in place of the standard black.
Order any of these extras below.
Single 11Kg Remove
GAS IT Single 11kg Refillable & Removable Fill Kit
This 11kg Refillable gas bottle with contents gauge & Removable
Black Fill-point
kit is an easy low budget way to get into refillables. Comes complete
with removable fill-point straight version as pictured (angled on
request) with UK head and OEM spec fill
hose. Fill hose choices right >
Other cost options? Leak Spray,
21.8LH Pigtail to connect to your regulator,
or a POL-Butane adaptor to re-use an existing Propane pigtail or
on-bottle POL regulator, Filter.
Order any of these extras below.
Single 11Kg
Locker
GAS IT Single 11kg Refillable & LockerFill 'Easyfit' Kit
This 11kg Refillable gas bottle with contents gauge & Locker-Bracket
Fill kit is an easy lower budget way to get into refillables. Comes
complete with angled bracket & filler head & OEM specification fill hose.
May come with the 'angled' on the fill head or the hose end, please ask
if you need one in particular. Fill hose normally 0.75m but also 1m
option right > Longer hoses are not normally need in-locker but
possibly used for under floor mount.
No cost option? Straight Bracket on request?
Other cost options? Leak Spray,
21.8LH Pigtail to connect to your regulator,
or a POL-Butane adaptor to re-use an existing Propane pigtail or
on-bottle POL regulator, Filter.
Order any of these extras below.
Gas-it 2nd Bottle Kits: 6Kgs
& 11Kgs:
Just add to an existing single setup to increase capacity
Second Bottle
Kit as 6Kg
GAS IT Second Bottle Kit Complete 6kg
A 6kg Refillable bottle plus the Gasit 2nd bottle Kit which includes a
link hose plus the necessary Tee Connector. Simple to install with the
standard straight-angled 0.5m link hose supplied but longer link hoses
are possible for special arrangements. Other hoses/lengths possible.
Other cost options? Leak Spray,
21.8LH Pigtail to connect to your regulator,
or a POL-Butane adaptor to re-use an existing Propane pigtail or
on-bottle POL regulator, Filter, Change-over head kit.
Order any of these extras below.
Second Bottle
Kit as 11Kg
GAS IT Second Bottle Kit Complete 11kg
An 11kg Refillable bottle plus the Gasit 2nd bottle Kit which includes a
link hose plus the necessary Tee Connector. Simple to install with the
Standard straight-angled 0.5m link hose supplied but longer link hoses
are possible for special arrangements. Other hoses/lengths possible.
Other cost options? Leak Spray,
21.8LH Pigtail to connect to your regulator,
or a POL-Butane adaptor to re-use an existing Propane pigtail or
on-bottle POL regulator, Filter, Change-over head kit.
Order any of these extras below.
Gas-it Twin Kits:
6Kgs & 11Kgs: Premium Kits? - Add a pigtail of
choice and a sticker maybe, we're still cheaper than 'Premium'
elsewhere!
Twin 6Kg
Remote
GAS IT Twin 6kg Refillables & Remote Fill Kit.
Twin 6kg
Refillable gas bottles with contents gauges & Remote Fill-point kit is an
easy way to get into refillables. Comes complete with remote fill-point and black fill-box and OEM
specification fill hoses. Main fill hose choices are as offered right >
Other cost options? 21.8LH Pigtails to connect to your regulator,
or POL-Butane adaptors to re-use existing Propane pigtails or on-bottle
POL regulator/s, Filters, Change-over,
White 'super' fill point upgrade in place of the standard black.
Order any of these extras below.
Twin 6Kg Removable
GAS IT Twin 6kg Refillables & Removable Fill Kit.
Twin 6kg Refillable gas bottles with contents gauges & Removable
Fill-point kit is an easy way to get into refillables. Comes complete
with 'Removable' fill-point and OEM specification fill hoses. Main fill
hose choices offered right
Other cost options? 21.8LH Pigtails to connect to your regulator,
or POL-Butane adaptors to re-use existing Propane pigtails or on-bottle
POL regulator/s, Filters, Change-over. NB: Picture shows Remote fill point see single Removable pic for illustration.
Order any of these extras below.
Twin 6Kg
Locker
GAS IT Twin 6kg Refillables & Locker Fill 'Easyfit' Kit
Twin 6kg
Refillable gas bottles with contents gauges & Locker-Bracket Fill kit is
an easy way to get into refillables. Comes complete with bracket
& filler head and OEM
specification fill hose. Fill hose is normally 0.75m but also 1.0m
option right >
No cost options? Straight Bracket on request?
Shorter 0.5m fill hose if better?
Other cost options? 21.8LH Pigtails to connect to your regulator,
or POL-Butane adaptors to re-use existing Propane pigtails or on-bottle
POL regulator/s, Filters, Change-over.
Order any of these extras below.
Twin 11Kg
Remote
GAS IT Twin 11kg Refillables & Remote Fill Kit.
Twin 11kg
Refillable gas bottles with contents gauge & Remote Fill-point kit is an
easy way to get into refillables. Comes complete with remote fill-point and black fill-box and OEM
specification fill hoses. Main fill hose choices are as offered right >
Other cost options? 21.8LH Pigtails to connect to your regulator,
or POL-Butane adaptors to re-use existing Propane pigtails or on-bottle
POL regulator/s, Filters, Change-over,
White 'super' fill point upgrade in place of the standard black.
Order any of these extras below.
"Full Monty Kit" GAS IT Twin 11kg Refillables with Remote Fill Kit
+ Auto-Change Head + Twin Pigtails
As above -
Twin 11kg
Refillable gas bottles with contents gauge & Remote Fill-point kit is an
easy way to get into refillables. Comes complete with remote fill-point and black fill-box and OEM
specification fill hoses.
Plus - Full Monty kit also includes the Twin Auto-manual Head Kit, (incl
link adapter and 2x 0.45mtr 21.8LH
Pigtails) Main fill hose choices are as right >
Other cost options? Filters,
White 'super' fill point upgrade in place of the standard black, angled
fill hose in place of double straight.
Order any of these extras below.
Twin 11Kg Removable
GAS IT Twin 11kg Refillables & Removable Fill Kit.
Twin 11kg Refillable gas bottles with contents gauge & Removable
Fill-point kit is an easy way to get into refillables. Comes complete
with removable fill-point and OEM specification fill hoses. Main fill
hose choices offered right
Other cost options? 21.8LH Pigtails to connect to your regulator,
or POL-Butane adaptors to re-use existing Propane pigtails or on-bottle
POL regulator/s, Filters, Change-over. NB: Picture shows Remote fill point see single Removable pic for illustration.
Order any of these extras below.
Twin 11Kg
Locker
GAS IT Twin 11kg Refillables & Locker Fill 'Easyfit' Kit
Twin 11kg
Refillable gas bottles with contents gauge & Locker-Bracket Fill kit is
an easy way to get into refillables. Comes complete with bracket
& filler head and OEM
specification fill hoses. Main fill hose is normally 0.75m but also 1.0m/1.5m
option right >. Long hoses are not normally need in-locker but
possibly used for under floor mount.
No cost option? Straight Bracket on request? Short 0.5m fill hose if better?
Other cost options? 21.8LH Pigtails to connect to your regulator,
or POL-Butane adaptors to re-use existing Propane pigtails or on-bottle
POL regulator/s, Change-over, Filters.
Order any of these extras below.
Gas-it Mixed Kits:
6Kgs + 11Kgs: Premium Kits? - Add a pigtail of
choice and a sticker maybe, we're still cheaper than 'Premium'
elsewhere!
11+6 Kg Remote
i.e. Mixed Sizes
GAS IT 11+6kg Refillables & Remote Fill Kit.
1x 11kg plus one 1x 6Kg
Refillable gas bottles with contents gauge & Remote Fill-point kit is an
easy way to get into refillables. Comes complete with remote fill-point and black fill-box and OEM
specification fill hoses. Main fill hose choices are as offered right >
Other cost options? 21.8LH Pigtails to connect to your regulator,
or POL-Butane adaptors to re-use existing Propane pigtails or on-bottle
POL regulator/s, Filters, Change-over,
White 'super' fill point upgrade in place of the standard black.
Order any of these extras below.
11+6 Kg Removable
GAS IT Twin 11+6kg Refillables & Removable Fill Kit.
1x 11kg plus one 1x 6Kg
Refillable gas bottles with contents gauge & Removable
Fill-point kit is an easy way to get into refillables. Comes complete
with removable fill-point and OEM specification fill hoses. Main fill
hose choices offered right
Other cost options? 21.8LH Pigtails to connect to your regulator,
or POL-Butane adaptors to re-use existing Propane pigtails or on-bottle
POL regulator/s, Filters, Change-over. NB: Picture shows Remote fill point see single Removable pic for illustration.
Order any of these extras below.
11+6 Kg Locker
i.e. Mixed Sizes
GAS IT Twin 11+6kg Refillables & Locker Fill 'Easyfit' Kit
1x 11kg plus one 1x 6Kg Refillable gas bottles with contents gauge & Locker-Bracket Fill kit is
an easy way to get into refillables. Comes complete with bracket
& filler head and OEM
specification fill hoses. Main fill hose is normally 0.75m but also 1.0m
option right >
No cost option? Straight Bracket on request? Short 0.5m fill hose if better??
Other cost options? 21.8LH Pigtails to connect to your regulator,
or POL-Butane adaptors to re-use existing Propane pigtails or on-bottle
POL regulator/s, Filters, Change-over.
Order any of these extras below.
Leak Spray Pen
GAS Leak Detection Spray Pen
(Tool-017)
Handy fine spray pen comes with 10ml of MOT specification Leak detection
spray. Enough for several joints/tests, ideal for tool box can be used for
testing pigtail changes. Non Staining and Non Corrosive for Brass and is
designed to show the smallest of leaks. Only with Gasit systems.
Hose Upgrade
Angled Fill Hose Upgrade for any Gasit Refillable Kit
Supply the kit fill hose with 1x angled and 1x straight end in place
of the all-straight standard version. Can be used to change hose
positioning/direction say at the cylinder elbow or even on an angled
filler to turn the hose to the vertical Only valid as an upgrade to any Gasit
cylinder/s kit below.
Super White Fill-head -
UPGRADE(FP-015-W UP)
Please note this is a kit upgrade price and
is only for the Remote Kits above.
Also
see Remote Fill Head Complete
below.
Gas-it Plus - 4-Hole Bottles as kit upgrades: Premium Kits? - Add a pigtail of
choice and a sticker maybe, we're still cheaper than 'Premium'
elsewhere!
Upgrade values not
included in any seasonal offers or cashbacks - but still available
4-Hole 'Plus' 6Kg Kit Upgrade :
(NB: Per cylinder)
Need the extra facilities of the 4-hole tank along with its improved
gauge and/or the Remote readout facility? Upgrade any of our kits by
adding this item to cart - one for every 6Kg cylinder. Price is correct,
6kg 4-hole is dearer than 11kg. A bit unclear in picture, the fill point
has an elbow fitted.
4-Hole 'Plus' 11Kg Kit Upgrade :
(NB: Per cylinder)
Need the extra facilities of the 4-hole tank along with its improved
gauge and/or the Remote readout facility? Upgrade any of our kits by adding this item to cart - one for
every 11Kg standard cylinder on your order.
A bit unclear in picture, the fill point has an elbow fitted.
Gasit 9 LED Gauge Sender & Readout Kit (ACCS-025
UP)
For the convenience of a remote gas level indication, works with our
4-hole GAS IT Plus tanks, easy retrofit, it doesn't require any of the
valves in the tank to be removed, great to add at a later
stage. Upgrade for GI 4-Hole only! NB per bottle!
(Straight purchase version further below)
Gas IT Components
NB: While many items are Gaslow compatible we must treat the two product
ranges separately, so if you want to mix them please create two
orders yourself, one for Gaslow products one for Gasit products. * All Gasit
is delivered direct from their warehouse so orders here must be for Gasit
products only *
GAS-IT Fitting / Tools
Anything
greyed-out
is out of stock
Cutters for the fill head boxes - 70mm only for thin sheet
like skirt, 70mm + 86mm for thicker insulated walls as found on most
motorhomes. You'll need one arbor plus one or both cutters. Sealants
below.
Jersey Lined Nitrile Safety Gloves (TOOL-030)
Protect yourself from accidental cold burn with thee excellent safety
gloves with safety cuff.
£5.95
Super White Fill-head - UPGRADE(FP-015-W UP)
Please note this is a kit upgrade price and
is only for the Remote Kits above.
Also
see Remote Fill Head Complete
below.
£6.95
Bottle Fixing Kit Single for 6/11Kg (0040)
Gas bottle bracket with spacer and strap to fit our 6 & 11kg refillable
and comparable bottles securely
£6.95
Drilling tip for the
hole cutters below - first put masking tape on the area to be drilled.
29mm Hole Cutter & Arbor:
(0044)
For Removable Fill Heads e.g.
29mm Heavy duty variable pitch bi-metal holesaw. Hardened HSS teeth for
fast clean cut. For cast iron, stainless and structural steel, alloyed
and non-alloyed aluminium, bronze, copper, PVC, acrylic and wood. With
drill-arbour & 6mm bit
£8.50
86mm + 70mm Cutters & Arbor Kit:
(0043)
For the inside rebate and outside hole for the Fill Head Box in thicker insulated
motorhome walls.
If needing both sizes at least cost this is a very convenient kit. Only sold along with Gasit
items.
£24.95
70mm Cutter & Arbor:
(0041)
For
mounting Remote Fill Head Box in thinner material of less than
5mm, in skirt e.g. Also on outside of thicker walls
For convenience you can of course use every cutter on its own arbor but
if needing both sizes at least cost you can add the 86mm cutter on its
own. Only sold along with Gasit components.
£13.50
86mm Cutter only: (TOOL-008)
For the inside hole/rebate for the Fill Head Box in thicker insulated
walls of motorhomes e.g.
if you need both sizes but don't want two arbours add this to your cart
along with the 70+Arbor. Only sold along with Gasit components.
£11.95
86mm Cutter & Arbor:
(0042)
For the inside hole/rebate for the Fill Head Box in thicker insulated
walls of motorhomes e.g.
For convenience you can of course use every cutter on its own arbor but
if needing both sizes at least cost you can add the 86mm cutter on its
own. Only sold along with Gasit components.
£15.95
Drilling tip for the
hole cutters above - first put masking tape on the area to be drilled.
GAS-IT Hoses & Hose Adapters
Anything
greyed-out
is out of stock
Part No:
Description
Prices/Options
NB: While many items are Gaslow compatible we must treat the two product
ranges separately, so if you want to mix them please create two
orders yourself, one for Gaslow products one for Gasit products. * All Gasit
is delivered direct from their warehouse so orders here must be for Gasit
products only *
Pigtails & Converters (German Specfic plus Secumotion type are much further below)
Refillable® POL Pigtail Converter.
21.8LH Nut - POL Adapter
(ACCS-024)(0001)
Converts Refillables -> POL-out for POL pigtail or reg
Reusing a UK propane pigtail? Maybe a
Secumotion for example? Or need to fit to a standard UK propane
regulator on-bottle? Screw this onto the refillable and hey
presto you've got a standard UK POL outlet for your reg or old pigtail! 5/8BSP-LH female POL x 21.8mm SI-LH female
POL®Refillable
Pigtail Converter.
POL to 21.8LH
Male (21.8LH Hose to POL bottle) (0082)
Extremely
handy as part of a multi-use system. Got one Refillable and a Calor
spare, or travelling abroad using other cylinders too? No problem
use 21.8LH Nut Pigtail plus adapters to suit Campingaz, French, Spanish and
now UK POL too. Also converts many imports (new extra washer may be
needed) but see also our German adapters far below.
21.8LH-NUT Pigtail
21.8LH Pigtails - standard Refillables Output
(PT-001-3-4)
Top quality GAS-IT High pressure LPG hose
Pigtail with 21.8LH nut x W20 EFV. Known as butane fit in the UK but this
hose works with
both propane and butane and fits the GAS IT and other refillable bottles with 21.8 LH.
The W20 end is
standard fit on the newer post-2004 wall mounted regulators & change-overs.
UK & EU Approved.
(See further below for W20-W20 pigtail)
POL Pigtail
POL Pigtails - Calor Propane Fit (PT-008-9)
Top quality GAS-IT High pressure LPG hose
Pigtail with POL Propane fitting x W20 EFV. Often needed in mixed
refillable+calor systems. Usually Cavagna.
The W20 end is
standard fit on the newer post-2004 wall mounted regulators & change-overs.
UK & EU Approved. Other lengths
available.
Auto-Manual Change-over Head KIT(REG-009-K-B-45)
Cavagna Changeover with MxMxM W20 to fit standard wall regulators and pigtails. Screws onto standard regulator
outlet. Complete with a pair of 0.45m 21.8LH Hoses to suit refillable bottles plus Coupler to fit to W20 regulator. Bargain.
Similar POL-propane unit also available as an option.
We can also supply regulators for those wishing to upgrade from older reg-on-bottle
systems or replacing an existing bulk-head regulator.
Auto-Manual Change-over Head KIT
(REG-009-K-B-75)
Cavagna Changeover with MxMxM W20 to fit standard wall regulators and pigtails. Screws onto standard regulator
outlet. Complete with a pair of 0.75m 21.8LH Hoses to suit refillable bottles plus Coupler to fit to W20 regulator. Bargain.
We can also supply regulators for those wishing to upgrade from older reg-on-bottle
systems or replacing an existing bulk-head regulator.
Auto-Manual Change-over Head (only)
(REG-009)
Cavagna
Changeover with MxMxM W20 to
fit standard wall regulators and pigtails. Screws onto standard
regulator outlet - but you may need a W20-FF-Coupler below to join the two? Automatically changes from
empty to full bottle or can be used manually if needed. Green & red
flags show the change and bottle in use. No need ever again to go out in the wet and cold or
the night to change bottles over!
W20 F/F Coupler
(REG-010)
Often used to add an Auto-change head to a
regulator that has a W20-Male outlet.
Fill
Hoses & Fittings
FH -Upgrade-1
Kit Upgrade - Angled Fill Hose in place of
straight
this item upgrades the 0.75m & 1.0m fill hoses only
FH -Upgrade-1
Kit Upgrade - Angled Fill Hose in place of
straight
this item upgrades the 1.5m & 2.0m fill hoses only
Fill Hose
Fast Fill JIC - 3/4 UNF Hoses (to 1.0m) (FH-001-02-03)
Fast Fill OEM JIC 'Hydraulic Style' E67.01 Hose with Straight Ends.
These are UK and EU approved so can be used in any country. Connects the
vehicles Brass JIC fillpoint directly to a GAS IT or Gaslow Refillable
bottle, GAS IT 4 hole Refillable Gas tanks, Alugas & more.
These Fast Fill hoses are held in stock in lengths from 0.5 mtr up to 3
mtr. Sizes over this can be made or 2 or more hoses can be connected
together with a separately purchased JIC Male-Male connector or even via
8mm gas pipe if an 8mm fill point is used.
As included in many of our kits.
Fill Hoses
Fast Fill JIC - 3/4 UNF Hoses (to 3.0m) (FH-005-07-10)
Fast Fill OEM JIC 'Hydraulic Style' E67.01 Hose with Straight Ends.
These are UK and EU approved so can be used in any country. Connects the
vehicles Brass JIC fillpoint directly to a GAS IT or Gaslow Refillable
bottle, GAS IT 4 hole Refillable Gas tanks, Alugas & more.
These Fast Fill hoses are held in stock in lengths from 0.5 mtr up to 3
mtr. Sizes over this can be made or 2 or more hoses can be connected
together with a separately purchased JIC Male-Male connector or even via
8mm gas pipe if an 8mm fill point is used.
As included in many of our kits.
ANGLED Fill Hose
ANGLED Fast Fill JIC 3/4 UNF Hoses (to 1m)
(FH-012-13-14)
Angled one end, straight at the other.
Fast Fill OEM JIC 'Hydraulic Style' E67.01 Hose with Straight Ends.
These are UK and EU approved so can be used in any country. Connects the
vehicles Brass JIC fillpoint directly to a GAS IT or Gaslow Refillable
bottle, GAS IT 4 hole Refillable Gas tanks, Alugas & more.
These Fast Fill hoses are held in stock in lengths from 0.5 mtr up to 3
mtr. Sizes over this can be made or 2 or more hoses can be connected
together with a separately purchased JIC Male-Male connector or even via
8mm gas pipe if an 8mm fill point is used.
ANGLED Fill Hoses
ANGLED Fast Fill JIC 3/4 UNF Hoses (to 3m)
(FH-016-18-21)
Angled one end, straight at the other.
Fast Fill OEM JIC 'Hydraulic Style' E67.01 Hose with Straight Ends.
These are UK and EU approved so can be used in any country. Connects the
vehicles Brass JIC fillpoint directly to a GAS IT or Gaslow Refillable
bottle, GAS IT 4 hole Refillable Gas tanks, Alugas & more.
These Fast Fill hoses are held in stock in lengths from 0.5 mtr up to 3
mtr. Sizes over this can be made or 2 or more hoses can be connected
together with a separately purchased JIC Male-Male connector or even via
8mm gas pipe if an 8mm fill point is used.
HD Chafe-free P-clips for Fill Hoses
(FH-028)
Each. heavy duty steel p-clips with rubber coating. Screws/rivets not supplied. Only with systems
JIC Elbow 90 deg M/F Connector (for fill hoses)
(FH-022)
Quickly change the direction of a JIC fill hose at the fillpoint or
tank/cylinder. Compatible with GAS IT, Gaslow, Alugas and all standard JIC hose
ends.
JIC Bulkhead Connector (for fill hoses)
(FH-031)
Link two fill hoses passing through a bulkhead,
keeping things gas tight and neat & tidy. 65mm long for bulkheads up to 15mm
thick, fits 20mm clearance hole. You might consider an angled hose/s
too? Compatible with GAS-IT, Gaslow, Alugas and all standard JIC hose
ends.
JIC Straight Connector (for fill hoses)
(FH-025)
Link two fill hoses
to extend. Compatible with GAS IT, Gaslow, Alugas and all standard JIC hose
ends.
JIC T-piece FxMxM (for fill hoses)
(FH-023)
Link two fill hoses to a
single bottle inlet e.g.,
keeping things gas tight and neat & tidy. Compatible with GAS IT, Gaslow, Alugas and all standard JIC hose ends.
(As included in the second cylinder kit).
JIC T-piece MxMxM (for fill hoses)
(FH-026)
Link three fill hoses together e.g
2 into 1.
Compatible with GAS IT, Gaslow, Alugas and all standard JIC hose
ends.
JIC Fill Point Blanking Cap (Female)
(FH-033)
Closes off the rear of a fill point or the bottle fill elbow.
JIC Fill Point Blanking Plug (Male)
(FH-032)
Closes off the end of a JIC Fill Hose.
PIC AWAITED
21.8LH Elbow M/F (for
pigtails) Not yet available.
Send the pigtail off at right angles to the standard bottle outlet to quickly change the direction of
the hose - solves problems in tight gas cupboards! Compatible with all
21.8LH pigtails from GAS IT, Gaslow, etc.
Please ignore the
colour variations above, they may be more to do with photography than
metals!
GAS-IT Upgrades & Fill-points & Accessories & Components greyed-out
= out of stock
NB: While many items are Gaslow compatible we must treat the two product
ranges separately, so if you want to mix them please create two
orders yourself, one for Gaslow products one for Gasit products. * All Gasit
is delivered direct from their warehouse so orders here must be for Gasit
products only *
Leak Spray Pen
GAS Leak Detection Spray Pen (TOOL-017)
Handy fine spray pen comes with 10ml of MOT specification Leak detection
spray. Enough for several tests, ideal for tool box can be used for
testing pigtail changes. Non Staining and Non Corrosive for Brass and is
designed to show the smallest of leaks. Only with systems
£2.50
Gasit 9 LED Gauge-Sender Kit (ACCS-025)
For the
convenience of a remote gas level indication, works with our 4-hole GAS
IT Plus tanks, easy retrofit, it doesn't require any of the valves in
the tank to be removed, great to add at a later stage. Note: Kit is a
per bottle - readout is for a single cylinder only. NB: Fits GI 4-Hole only!
£43.95
Super White Fill-point - KIT UPGRADE
(FP-015-W(asUPGRADE))
Please note this is a kit upgrade price and
is only for the Remote Kits above.
It is
much dearer on its own, see the
Remote Fill Head Complete
further below - a painted
item.
£6.95
White Sticker Ring to fit round the Fill-point
(STICK-001) this sticker
suits the 70mm diameter of the 'pot' type fill heads, can be used with
black or white versions but more commonly with the white of course. Only with systems
£1.95
21.8LH to POL Adapter (Refillables->POL-out)
(0001) Reusing a UK propane pigtail? Maybe a
Secumotion for example? Or need to fit to a standard UK propane
regulator on-bottle? Screw this onto the refillable and hey
presto you've got a standard UK POL outlet for your reg or old pigtail!
5/8BSP-LH female POL x 21.8mm SI-LH female
£7.95
21.8LH Tee Piece (FxMxM)
(ACCS-157) Typically used
to feed twin regulators each using different pressures (for vehicle &
BBQ for example) but applicable wherever two pigtails need to come off
one bottle outlet. Can also be used with a VAL-V-029 cap to make an
Elbow
£17.95
21.8LH Blanking Cap
(VAL-V-029) Blanks off
any 21.8LH Male such as a Refillable Outlet (service valve) or say one
of the outlets on the tee-piece above.
£3.50
21.8LH - W20 M-M Adapter (Joiner)
(GI-0129) Join two or
more pigtails together in a daisy-chain with this simple adapter-joiner.
£8.95
W20 Elbow M/F (ACCS-077)
Regulator/change-over problem solver. Not enough headroom for a
change-over - add an elbow. Hoses fouling cupboard near reg/change - add
an elbow. Works well with the T-piece too.
£10.95
W20 T-piece with NRV F+M+M
(ACCS-076)
The simplest change-over with Non-Return Valves, install at the regulator, leave all joints
intact, and just turn the bottles on/off at the bottle valves as
required*.
Connects two cylinders to one bulkhead regulator. Easy install, female
W20 screws on the regulator and the 2x male W20s with non-return valves
are for your 2 pigtails from the bottles to be connected. Add W20 Elbow
if you want 2x parallel
connections out.
NB: * If both bottles are turned to on they will both empty at the same
time.
£11.95
Blanking Plug W20 (Non-Gasit) (W20Blank)
Used to blank off any W20 entry/exit, so behind a fill head left in when
changing vehicles or on one side of a change-over when only one bottle
is connected, etc. Normally only supplied with systems and usually
posted out separately.
£8.95
Wall Plate Manifold T Twin W20 to POL
out
(ACCS-075) Takes two of the latest style W20 pigtails in and offers a UK Propane
socket out - to take a standard pre-2004 on-bottle propane regulator.
With built in non-return valves. Accepts W20 filters too.
A cheap way to convert an older UK on-bottle propane reg system to a
more modern twin pigtail manual change-over.
Connects two cylinders to one POL regulator. Once both are connected
just turn individual bottles on/off to change over.
£19.95
Wall Plate Manifold T Single W20 to POL
out
(ACCS-102) Takes just one new style W20 pigtail in and offers a UK Propane
socket out - i.e. to take a standard pre-2004 on-bottle propane
regulator - now mounted on the wall.
An easy way to convert an older on-bottle propane reg system to a
pigtail + reg system that accepts an in-line W20 gas filter.
£14.95
Installed Filters Filters are
quite long and may also be handed. See new High Capacity versions
below
You do need to work out if you have
sufficient space and if a handed version will be best for re-attaching
and re-routing the pigtail
without straining it. In the case of refillable bottles you also need to
remember that the gauge faces front with the pigtail going off to the right.
Angled filters for refillables re assembled for compactness on
collarless bottles. (See also the new high capacity versions
further below).
RH VERSION
LPG Filter for Refillables - RH
(0049-RH
/ GI-VF-003)
Using the standard Refillables 21.8LH threads
this well priced compact but high flow filter will protect your
regulator and other gas system parts from any included oils or similar
contaminants - very cost effective! Low profile & 111mm long.
Angled or straight versions normal for bottles,
See the new high capacity version
below
£37.95
LH VERSION
LPG Filter for Refillables - LH(0049-LH / GI-VF-004)
Using the standard Refillables 21.8LH threads
this well priced compact but high flow filter will protect your
regulator and other gas system parts from any included oils or similar
contaminants - very cost effective! Low profile & 111mm long.
Angled or straight versions normal for bottles,
See the new high capacity version below
£37.95
STRAIGHT
DISCONTINUED
LPG Filter for Refillables - Straight
(0048
/ GI-VF-001). Using the standard Refillables 21.8LH threads
this well priced compact but high flow filter will protect your
regulator and other gas system parts from any included oils or similar
contaminants - very cost effective! Low profile
111mm long - quite long with a pigtail attached!
See the new high capacity version below
£37.95
W20 STRAIGHT
DISCONTINUED
W20 LPG Filter for Bulkhead Regulator or
Change-over, Straight
(GI-VF-008).
Using the standard
bulkhead regulator W20 threads
this well priced compact but high flow filter will protect your
regulator and other gas system parts from any included oils or similar
contaminants - works with Refillables or Calor and very cost effective! Low profile
111mm long - so quite long with a pigtail attached! NB: W20 Elbow and/or W20 Tee might be
needed, also probably 2x filters for changeover? See
ACCS-076 &
077 below. See the new high capacity version below
£48.95
Filter Element - spare / replacement for
above
(ACCS-072) If the filter is catching oils etc regularly
then the element will need to be replaced from time to time. A great way
of checking if oil is present too!
£4.95
New: High Capacity
Filters & Elements (Info: Nut end = bottle end)
New:
BOTTLE STRAIGHT HC
High Capacity LPG Filter for Refillables, Straight
(GI-VF-010).
Using the standard Refillables 21.8LH threads
this High Capacity high flow filter will protect your
regulator and other gas system parts from any included oils or similar
contaminants - very cost effective! ~113mm long and fairly deep.
NB: Takes the GI-ACCS-172 HC Filter below
Also fits Gasit generation-1 gas tanks
£58.95
New:
BOTTLE RH HC
High Capacity LPG Filter for Refillables, RH
(GI-VF-014).
Using the standard Refillables 21.8LH threads
this RH High Capacity high flow filter will protect your
regulator and other gas system parts from any included oils or similar
contaminants - very cost effective! ~115mm long and fairly deep.
NB: Takes the GI-ACCS-172 HC Filter below
£58.95
New:
BOTTLE LH HC
High Capacity LPG Filter for Refillables, LH
(GI-VF-013). Using the standard Refillables 21.8LH threads
this LH High Capacity high flow filter will protect your
regulator and other gas system parts from any included oils or similar
contaminants - very cost effective! ~115mm long and fairly deep.
NB: Takes the GI-ACCS-172 HC Filter below
£58.95
New:
W20 STRAIGHT HC
High Capacity W20 LPG Filter for Bulkhead Regulator
or Change-over, Straight
(GI-VF-009).
Using the standard
bulkhead regulator W20 threads
this well priced compact but high flow higher capacity filter will protect your
regulator and other gas system parts from any included oils or similar
contaminants - works with Refillables or Calor and very cost effective!
~113mm long - so quite long with a pigtail attached! NB: W20 Elbow and/or W20 Tee might be
needed, also probably 2x units for changeover? See ACCS-076 &
077 below.
NB: Takes the GI-ACCS-172 HC Filter below
£58.95
New:
8MM STRAIGHT HC
High Capacity LPG Filter, 8mm Straight
(GI-VF-012).
With inline 8mm compression fittings this High Capacity high flow filter will protect
any
regulator and other gas system parts from any included oils or similar
contaminants as long as plumbed-in via 8mm pipe - very cost effective!
NB: Takes the GI-ACCS-172 HC Filter below
Very suitable for Propex-VW tank systems too.
£42.95
HC FILTER ELEMENT
High Capacity 'HC'
Filter Element - spare part for
the Higher Capacity Filters
above
(ACCS-172) If the filter is catching oils etc regularly
then the element will need to be replaced from time to time. A great way
of checking if oil is present too!
£7.95
NB: The 'Calor' POL
Filters below are assembled differently to accommodate the usual 'Calor'
bottle collar, please use the pictures below to choose rather than any
ideas of what lh/rh should be
R-POL VERSION
LPG Filter for POL-Propane (Calor) - R
(0049-R-POL) Using the standard
POL Bullnose fitting
this well priced fairly compact but high flow filter will protect your
regulator and other gas system parts from any included oils or similar
contaminants - very cost effective! Low profile & 111mm long.
Angled or straight normal for bottles,
£49.95
L-POL VERSION
LPG Filter for
POL-Propane (Calor) - L
(0049-L-POL)
Using the standard
POL Bullnose fitting
this well priced fairly compact but high flow filter will protect your
regulator and other gas system parts from any included oils or similar
contaminants - very cost effective! Low profile & 111mm long.
Angled or straight normal for bottles,
£49.95
S-POL VERSION
LPG Filter for
POL-Propane (Calor) - S
(0048-POL) Using the standard POL Bullnose fitting
this well priced fairly compact but high flow filter will protect your
regulator and other gas system parts from any included oils or similar
contaminants - very cost effective! Low profile & 111mm long.
Straight version is normal for tanks, Angled normal for bottles but straight
suits some
cupboards,
£49.95
Filter Element - spare / replacement for
above
(ACCS-072) If the filter is catching oils etc regularly
then the element will need to be replaced from time to time. A great way
of checking if oil is present too!
(0055)
Recommended for all customers with the fixed fill point.
To get the D.G.I. filter behind a UK bayonet you can use
this twin kit of Filter + UK Extension. The filter itself can still be
used separately along with your existing Euro adapters to make a
comprehensive set. It might be usable on top of the UK point
if the pump head accepts it.
(0010) For most European countries North and
South including Ireland. Covers France,
Italy, Poland, Germany, some Spain & Portugal, Austria, Belgium, Southern Ireland,
Czech Republic, Scandinavia, some Netherlands. Free bag
£12.95
Travel Fill Adapter Kit - European - All Europe
(0011) For all European countries north and south
as above including rest of Spain, Portugal & Switzerland. The included new
Euronozzel may appear anywhere on new equipment. Free bag.
£19.95
Travel Fill Adapter Kit, France & Italy
(FA-002)
For many southern and eastern European countries. Covers France
& Italy, plus some of Spain, Portugal, Austria & Scandinavia. Also
Greece, Turkey, and many E. European countries
£6.95
Travel Fill Adapter Kit, Germany & Eire
(FA-003)
For many northern European countries incl
Ireland, also covers
Belgium, Austria again, Luxembourg &
parts of Netherlands.
£9.95
Travel Fill Adapter Kit, Spain
(FA-004)
Spain and Switzerland, but may appear on new
equipment anywhere, an improved push-on design with less 'puff' on
disconnect. Ideal upgrade for those who already have Euro +
France-Italy.
£9.95
Campingaz Reserve Adapter - travel backup
(ACCS-092) An adapter that allows you to
connect a European Campingaz cylinder to your system in place of the
refillable. Rarely necessary but a budget back up 'just in case'.
Connects Campingaz bottles to the 21.8LH 'Butane Nut' used by refillables
£9.50
POL Reserve Adapter
(0082)
Connects POL bottle to 21.8LH
Refillable Hose
Extremely
handy as art of a multi-use system. Got one Refillable and a Calor
spare, or travelling abroad using other cylinders too? No problem
use a 21.8LH Pigtail plus adapters to suit Campingaz, French, Spanish, and
now UK POL too.
£14.95
UK Adapter (Replacement) (FA-001)
Fits the removable fill point kit and many tank
fill points of similar design. Only needed as a spare or replacement
part. NB: Does not convert foreign fill points to UK.
£8.95
Pair Rubber O-rings for Travel Fill Heads
(FA-007)
Rubber o-rings for the 21.8 fillers. NB: This O-ring is lighter weight than
the washer pictured.
£3.95
Fill
Heads & Accessories
Angled Rubber Boot - 70mm Remote Fill head
(FP-013) Add to the Round Black or White Filler Box
(only) to
create a gas tight seal. It slips over the back of the fillpoint 70mm
round box and allows the back of the gas box to be sealed off from the
inside of the vehicle and/or just to protect it from the elements.
£7.50
Straight Rubber Boot - 70mm Remote Fill head
(FP-012) Add to the Round Black or White Filler Box
(only) to
create a gas tight seal. It slips over the back of the fillpoint 70mm
round box and allows the back of the gas box to be sealed off from the
inside of the vehicle and/or just to protect it from the elements.
£9.95
Straight Boot Kit - Removable Fill head
(FP-034) Flange &
Rubber Boot connection for removable fill points (or for any fill points
mounted externally to the vehicle with our straight or angled fill
bracket). NB: Can also be used with the angled fill point but then you
must file away the metal part just to ease the angled head through the
aperture.
£19.95
Remote Fill Head Complete Angled White
(FP-002+FP-015-W)
No Hose included with this, buy separately. Complete Round 70mm Super Filler Box & White Lid with Angled JIC brass fillpoint. You need to cut a 70mm
hole in the vehicle or skirt to fit this fill point box. Interchangeable with the Gaslow & Autogas 2000 ones and works
with all their products. Straight version on request.
As included in some of our kits. Also 8mm
compression olive fitting possible in place of JIC.
£36.95
White Sticker Ring to fit round the Fill-point
(Stick-001)
suits the 70mm diameter of the 'pot' type fill heads, can be used with
black or white versions but more commonly with the white. Only with systems
£1.95
LPG Gas Locker Sticker
(Stick-018)
Standard 100mm LPG warning label on a very high
tack vinyl for locker doors. With alcohol wipe to clean off waxes,
silicones, etc. Only with systems
£1.95
Remote Fill Head Straight - No Hose /
Boot
(FP-015+FP-001) Complete Round 70mm Filler Box & Black Lid with
Straight JIC brass
Fillpoint (no boot). You need to cut a 70mm
hole in the vehicle or skirt to fit this fill point box. Interchangeable with the Gaslow & Autogas 2000 ones and works
with all their products.
As included in many of our kits. Also 8mm
compression olive fitting possible in place of JIC.
£29.95
Remote Fill Head Angled - No Hose /
Boot
(FP-015+FP-002) Complete Round 70mm Filler Box & Black Lid with Angled JIC brass
Fillpoint (no boot). You need to cut a 70mm
hole in the vehicle or skirt to fit this fill point box. Interchangeable with the Gaslow & Autogas 2000 ones and works
with all their products.
As included in many of our kits. Also 8mm
compression olive fitting possible in place of JIC.
£29.95
(boot not shown)
Remote Fill Head & Boot Angled - No Hose
(0005) Complete Round 70mm Filler Box & Black Lid with Angled JIC brass
Fillpoint and angled Rubber Boot. You need to cut a 70mm
hole in the vehicle or skirt to fit this fill point box. Interchangeable with the Gaslow & Autogas 2000 ones and works
with all their products.
As included in many of our kits. Also 8mm
compression olive fitting possible in place of JIC.
£37.95
(boot not shown)
Remote Fill Head & Boot Straight - No Hose
(0004) Complete Round 70mm Filler Box & Black Lid with Straight JIC brass
Fillpoint and straight Rubber Boot. You need to cut a 70mm
hole in the vehicle or skirt to fit this fill point box. Interchangeable with the Gaslow & Autogas 2000 ones and works
with all their products.
As included in many of our kits.
£39.95
STR/ANGLED/JIC/8MM
Bare bones Fill Head Straight or Angled
(FP-001/002/003/004) Specify Straight or Angled in message to seller or promptly by email.
Bare bones item for custom install or for swap out maybe.
8mm on request. As included in many of our kits.
£21.95
Removable Fillpoint Angled (No Hose)
(FP-005)
This is a UK high quality JIC Angled Removable
bayonet fill point usually used mounted directly on the vehicle or with
the 70mm recessed fill box or can be mounted on a tow bar or under a
vehicle maybe using an Angled Fill Bracket. Takes the Fast fill E67.01
Spec Fill Hoses in various lengths.
The UK Fill Nozzle unscrews to give a tidy
near-flush
install only about 52x52mm external and uses the same screw thread as the European adapters to
create a full travel system. 28mm hole.
£25.95
Removable Fillpoint Straight (No Hose)
(FP-006)
This is a UK high quality JIC Straight Removable
bayonet fill point usually used mounted directly on the vehicle or with
the 70mm recessed fill box or can be mounted on a tow bar or under a
vehicle maybe using an Angled Fill Bracket. Takes the Fast Fill Hoses in various lengths.
The UK Fill Nozzle unscrews to give a tidy
near-flush
install only about 52x52mm external and uses the same screw thread as the European adapters to
create a full travel system. 28mm hole.
£25.95
Removable Fillpoint 8mm Angled (No Hose)
(FP-008) This is a UK high quality JIC angled Removable
bayonet fill point with 8mm compression outlet for metal plumbed filler
pipe. Could be used with the 8mm Adapter below plus a Bulkhead connector
to plumb copper/steel to the locker wall and then usual flexible fill
hose from there to bottle.
The UK Fill Nozzle unscrews to give a tidy
near-flush
install only about 52x52mm external and uses the same screw thread as the European adapters to
create a full travel system. 28mm hole.
£25.95
Filler Point to 8mm Adapter
(FP-017)
Connects to fill point / connector male and
offers 8mm lpg compression out. Works both ways of course so also
connects 8mm copper to a fillpoint straight connector or bulkhead
connector to get back to rubber fill hose to connect to bottle.
£4.95
JIC Bulkhead Connector (for fill hoses)
(FH-031)
Link two fill hoses passing through a bulkhead, keeping things gas tight
and neat & tidy. 65mm long for bulkheads up to 15mm thick, fits 20mm
clearance hole. Also fits 8mm adapter above.
£5.95
Locker Fill Head Kit & Std 0.75m Locker Hose
(0012A) The GAS IT In locker fill point kit fully
complies with all current 2014 EU and UK regulations. NB: Although legal
you may still be refused service in some parts of Europe when trying to
fill in-locker. It comes with 0.75m OEM spec approved
fast fill hose, Angled Brass Fill point, dust cover protection, GAS IT
Heavy Duty Angled Mounting Bracket galvanized and pre drilled.
Compatible with major brands with separate 80% valve, (not Safefill)
(Straight bracket / point on request). As included in some of our kits.
£49.95
Locker Fill Head Kit & 1.00m Locker Fill Hose
(0012A-100) The GAS IT In locker fill point kit fully
complies with all current 2014 EU and UK regulations. NB: Although legal
you may still be refused service in some parts of Europe when trying to
fill in-locker. It comes with 1.00m OEM spec approved
fast fill hose, Angled Brass Fill point, dust cover protection, GAS IT
Heavy Duty Angled Mounting Bracket galvanized and pre drilled.
Compatible with major brands with separate 80% valve, (not Safefill)
(Straight bracket / point on request). As included in some of our kits.
£51.95
Locker Fill Head Kit (No Hose)
Please state options on checkout or by email
immediately following - angled or straight head? & angled or straight
bracket?
(e.g. FP-002+FP-009+FP-010) Default is angled
head and angled bracket. In-locker ('Easyfit') fill point without hose. NB: Although
perfectly legal you may still be refused service in some parts of Europe
when trying to fill in-locker. (Straight bracket and/or fill point on request). As in some of our kits.
£32.95
Gasit's
'long' brackets below are now their standard supply, as in the various kits
etc above.
Straight version
of pic below
Straight Bracket 'Long' - as spare part
(FP-009-STR) Straight bracket in 3mm steel, 180mm long and pre-drilled to take the
brass fill point heads as above. Can be used for custom installation.
£7.95
Angled Bracket 'Long' - as spare part
(FP-009-ANG)
Angled bracket in 3mm steel at 180mm long incl 50mm bent section and pre-drilled
as pictured to take the
brass fill point heads as above. Can be used for custom installation.
£7.95
Second Cylinder Connection Kit
(0008)
Fill Link hose for connecting two refillable bottles
together along with a 'JIC' T-piece to allow both the fill hose & the
link hose to fit onto one bottle.
As included in our twin kits.
£29.95
Cylinder-only sales:
Very rare but we need to say that any cashback / discount schemes do not
apply
6Kg Cylinder
6Kg GAS-IT Cylinder (Maybe 2nd Cylinder?)
(VB-001) Cylinder only 6Kg. Can be used as a no1 or as
no2 with the right connectors as just above.
Fitted with float level & is content
controlled. Comes with the standard refillable JIC fill elbow. Can be partnered with the Gaslow bottle and Gaslow, Caratank
and GAS IT fillpoints & hoses.
The gas outlet is
the UK specification 21.8 LH (109) nut thread also
known as the butane nut.
Specification: Approx 12.5 litres (at 80%);
470mm H x 246mm dia. Empty Weight: 7 Kg approx.
£121.95
CHEAPER IN KITS
11Kg Cylinder
11Kg GAS-IT Cylinder (Maybe 2nd Cylinder?)
(VB-002) Cylinder only 11Kg. Can be used as a no1 or as
no2 with the right connectors as just above.
Fitted with float level & is content
controlled. Comes with the standard refillable JIC fill elbow. Can be partnered with
Gaslow bottles and Gaslow, Caratank
and GAS IT fill-points & hoses.
The gas outlet
is the UK specification 21.8 LH (109) thread also
known as the butane nut.
Specification: Approx 21 litres (at 80%);
550mm H x 304mm dia. Empty Weight: 10.7 Kg approx.
£142.95
CHEAPER IN KITS
Cylinder-only sales:
Very rare but we need to say that any cashback / discount schemes do not
apply
6/11Kg PLUS
Cylinders
6Kg & 11Kg GAS-IT PLUS 4-Hole Cylinders
Not yet available singly but we can make up
systems with these, please ask for an upgrade quote. The best and safest
- including excess flow valve, internal liquid phase separator, built-in
float gauge & sender (to optional remote LED readout kit), as well as
usual 80% auto-shut-off. Removable Handle.
Can be used as a no1 or as
no2 with right parts. Can be partnered with
Gaslow bottles and Gaslow, Caratank
and GAS IT fill-points, hoses, etc. The gas
outlet is the UK specification 109 nut (21.8 LH) thread also
known as the butane nut.
Specification 6Kg: Approx 10 litres (at 80%);
470/445mm x 230mm dia. Wt Empty: 11.8 Kg approx - no handle : Specification
11Kg: Approx 21 litres (at 80%); 580/560mm x 300mm dia. WT Empty: 13.8 Kg approx
- without handle.
GAS-IT Regulators / Accessories /
Fittings
German conversion items are further below. Anything
greyed-out
is out of stock
NB: While many items are Gaslow compatible we must treat the two product
ranges separately, so if you want to mix them please create two
orders yourself, one for Gaslow products one for Gasit products. * All Gasit
is delivered direct from their warehouse so orders here must be for Gasit
products only *
R001
30Mbar Bulkhead Regulator (like sm Truma)
Straight 8mm version.
(REG-001) Cavagna Micro 30mb Motorhome and Caravan Regulator with 5yr guarantee. Compact
footprint with a 8mm outlet plus leak test point and a W20 inlet for
standard pigtails. Full 5 year no quibble warranty even without having
to buy a new stainless steel hose.
£17.95
R002
30Mbar Bulkhead Regulator (like sm Truma)
Straight 10mm version.
(REG-003) Cavagna
Micro 30mb Motorhome and Caravan Regulator with 5yr guarantee. Compact
footprint with a 8mm outlet plus leak test point and a W20 inlet for
standard pigtails. Full 5 year no quibble warranty even without having
to buy a new stainless steel hose.
£20.95
R003
30Mbar Bulkhead Regulator (like sm Truma)
Angled
8mm version. (REG-002)
Cavagna Micro 30mb Motorhome and Caravan Regulator with 5yr guarantee. Compact
footprint with a 8mm outlet plus leak test point and a W20 inlet for
standard pigtails. Full 5 year no quibble warranty even without having
to buy a new stainless steel hose.
£20.95
R004
30Mbar Bulkhead Regulator (like sm Truma)
Angled 10mm version.
(REG-004)Cavagna
Micro 30mb Motorhome and Caravan Regulator with 5yr guarantee. Compact
footprint with a 8mm outlet plus leak test point and a W20 inlet for
standard pigtails. Full 5 year no quibble warranty even without having
to buy a new stainless steel hose.
£21.95
30Mbar Micro-Combo Bulkhead Regulator
(REG-0050 Cavagna
Micro 30mb Motorhome and Caravan Regulator plus Auto-change All-in-one with 5yr guarantee. Compact
footprint with a 8mm outlet plus leak test point and 2x W20 inlets for
standard pigtails. Full 5 year no quibble warranty even without having
to buy a new stainless steel hose.
£39.95
30Mbar Micro-Combo Bulkhead Regulator
(REG-006) Cavagna
Micro 30mb Motorhome and Caravan Regulator plus Auto-change All-in-one with 5yr guarantee. Compact
footprint with a 10mm outlet plus leak test point and 2x W20 inlets for
standard pigtails. Full 5 year no quibble warranty even without having
to buy a new stainless steel hose. Pictures are same reg from
different angle!
£39.95
37Mbar On-Wall Regulator for Refillables
(REG-007 + REG-015/17/20) Quality
Cavagna 37mb bulkhead mount Regulator with pigtail inlet fitting (M20/W20).
Outlet 3/8" BSP-F for outlet options of 8mm or 10mm compression or even
8mm rubber pipe nozzle. (state which). The only 37mb to take a W20 Auto
Changeover. Regulator comes with Cavagna's no quibble 5 year warranty.
£19.95
37Mbar On-bottle Regulator for Refillables
21.8LH & Hose Nozzle for 8mm tubing.
(REG-008 + REG-015) Top quality 5yr warranty with high 4Kg output for pre-2004 systems. Fits
directly onto Refill 21.8LH.
£13.95
37Mbar On-bottle Regulator for Refillables
21.8LH & Compression fitting 8mm
(REG-008 + REG-017)
Top quality 5yr warranty with high 4Kg output for pre-2004 systems. Fits
directly onto Refill 21.8LH
£19.95
37Mbar On-bottle Regulator for Refillables
21.8LH & Compression fitting - 10mm
(REG-008 + REG-020) Top quality 5yr warranty with high 4Kg output for pre-2004 systems. Fits
directly onto Refill 21.8LH
£19.95
See also our
wall-block above for an alternative pre-2004 solution involving pigtails
37mbar (standard) Easyfit POL Regulator
(REG-018)
With handwheel. Budget but good Cavagna
1.5Kg output for pre-2004 propane systems. Fits UK 'Calor' type Propane - or refillables
when used along with the '21.8LH to POL Adapter' or manifold above.
£7.95
50Mbar On-bottle POL Regulator
(REG-021)
1.5Kg output for pre-2004 50mbar imports. Fits UK 'Calor' Propane - or refillables
when used along with the '21.8LH to POL Adapter' or manifold above. NB Not for UK spec
'vans!
£9.95
30mbar On-bottle POL Regulator (0088)
Quality
1.5Kg output for 30mbar systems. Fits UK 'Calor' type Propane - or refillables
when used along with the '21.8LH to POL Adapter' or manifold above. Great spare if
worried about oiled regulator failure!
£19.95
2m of 8mm Low Pressure Orange LPG Hose
(ACCS-039-2) NB: Priced for supply with other Gasit Products
- cannot be mixed with other product lines.
The reinforced version
of standard low pressure flexible gas/lpg tubing as used with on-bottle
regulators or to
create a BBQ point extension.
£3.95
See also our
wall-block above for an alternative pre-2004 solution involving pigtails
UK Reserve Fill Hose Kit POL to Fillpoint
(0080) Unable to get Autogas maybe because you don't
want to move? This special hose links an exterior POL exchange bottle
(Calor Propane e.g.)
to your Gasit fill point so you can then use your system normally
without dismantling. The fill hose supplied connects to a UK POL Propane
cylinder.
£25.95
EU Reserve Fill Hose Kit 21.8LH to Fillpoint
(0098) Unable to get Autogas maybe because you don't
want to move? This special 21.8LH Nut hose links an exterior exchange bottle
to your Gasit fill point so you can then use your system normally
without dismantling. The fill hose supplied connects to a 21.8LH
cylinder as often used in Europe but add adapters to fit most European bottles. (Add the GI-0082 adapter
for UK Propane)
£25.95
UK / Shell Refilables Secumotion Pigtail
(PT-014)
Truma 450mm high pressure rubber gas hose for use with
Gasit refillable bottles in Secumotion or similar systems. (Customers do
use the cheaper UK POL version from their dealer and add a 21.8LH to
POL Adapter from higher up page)
£49.95
Spare Rubber Washers Pack for W20 Pigtails
(ACCS-003)(Pack3)
Replacement nitrile rubber washer for general use like
W20 pigtail hoses, gas fittings and so forth. Nom Size: 17mm od x 10mm
id x 2mm. Replaces rubber or fibre
types. Actual washer is thinner that the picture of the 3mil
version.
£1.75
Thick Rubber Washers Pack for W20 Pigtails
(ACCS-141)(Pack3) Larger/thicker version of
the 003. Size: 18mm od x 11mm id x 3mm. Replaces rubber or fibre
types.
£1.95
Spare Rubber Washers Pack for 21.8 Pigtails
(ACCS-024W)(Pack3) Replacement 21.8LH washer
for the 21.8LH to POL Adapter. Heavy duty high shear (harder) washer in
nitrile rubber is an easier fit than fibre types. Nom Size: 22mm od x
12-13mm id x 2mm. Replaces rubber or fibre
types.
£1.95
Service Washers Pack for Filter inlets
(ACCS-074)(Pack3) Replacement
washers for the Inlet of all types of Gasit in-line vapour
filters.
Size: 19mm od x 6mm id x 2mm thick.
£1.95
W20-W20 Pigtail 0.5m For reg-changeover?
(PT-011) Need to install the change-over remotely from the reg? This
W20-W20 pigtail allows that.
£6.95
Auto-Manual Change-over Head KIT 0.45m
(REG-009-K-B-45) Cavagna Changeover with MxMxM W20 to fit
standard wall regulators and pigtails. Screws onto standard regulator
outlet. Complete with a pair of 0.45m 21.8LH Hoses
to suit refillable bottles plus Coupler to fit to W20 regulator. Bargain.
We can also
supply regulators for those wishing to upgrade from older reg-on-bottle
systems or
replacing an existing bulk-head reg.
£39.95
Auto-Manual Change-over Head KIT 0.75m
(REG-009-K-B-75) Cavagna Changeover with MxMxM W20 to fit
standard wall regulators and pigtails. Screws onto standard regulator
outlet. Complete with a pair of 0.75m 21.8LH Hoses
to suit refillable bottles plus Coupler to fit to W20 regulator. Bargain.
We can also
supply regulators for those wishing to upgrade from older reg-on-bottle
systems or
replacing an existing bulk-head reg.
£39.95
Auto-Manual Change-over Head
(REG-009)
Cavagna
Changeover with MxMxM W20 to
fit standard wall regulators and pigtails. Screws onto standard bulkhead
regulator outlet - but you may need a W20-FF-Coupler below to join the two?
(or the new accs-149 to join to an old style POL reg). Automatically changes from
empty to full bottle or can be used manually if needed. Green & red
flags show the change and bottle in use. No need ever again to go out in the wet and cold or
the night to change bottles over!
£35.95
W20 F/F Coupler (REG-010)
Often used to add an Auto-change head to a
regulator that has a W20-Male outlet.
£3.95
New: W20F to POL-F Coupler (ACCS-149)
An easy-fit way to convert an older style
on-bottle propane system to a wall mounted auto change system. Just
screw this onto the wall mounted auto-head
reg-009, screw in your existing POL reg and then add a couple of
pigtails to connect bottles to the auto-head. For Calor systems too.
£7.95
W20 Elbow M/F
(ACCS-077)
Regulator/change-over problem solver. Not enough headroom for a
change-over - add an elbow. Hoses fouling cupboard near reg/change - add
an elbow. Works well with the T-piece too.
£9.95
W20 T-piece with NR Valves F+M+M
(ACCS-076)
Connects two cylinders to one bulkhead regulator. Easy install, female
W20 screws on the regulator and the 2x male W20s with non-return valves
are for your 2 pigtails from the bottles to be connected. Simply turn
bottles on/off at their taps for manual change-over. If both bottles are
turned to on they will empty at the same time. Add a W20 Elbow for 2x horizontal
pigtail connections.
£11.95
JIC Elbow 90 deg M/F Connector (for fill hoses)
(FH-022)
Quickly change the direction of a JIC fill hose at the fillpoint or
tank/cylinder. Compatible with Gasit, Gaslow, Alugas and all standard JIC hoses
£7.95
Gas bottle Securing Kit (Single)
(0040)
Gas bottle bracket with spacer and strap to fit the 6 & 11kg refillable
and similar bottles securely
£6.95
HD Chafe-free P-clips for Fill Hoses
(FH-028)
Each. heavy duty steel p-clips with rubber coating. Screws/rivets not supplied. Only with systems
£1.50
White Sticker Ring to fit round the Fill-point
(Stick-001)
suits the 70mm diameter of the 'pot' type fill heads, can be used with
black or white versions but more commonly with the white.
£2.95
LPG Gas Locker Sticker
(Stick-018)
Standard 100mm LPG warning label on a very high
tack vinyl for locker doors. With alcohol wipe to clean off waxes,
silicones, etc.
£2.95
GAS Leak Detection Spray Pen
(GI-LS
)
Handy fine spray pen comes with 10ml of MOT specification Leak detection
spray. Enough for several tests, ideal for tool box can be used for
testing pigtail changes. Non Staining and Non Corrosive for Brass and is
designed to show the smallest of leaks. Only with Gasit systems.
£2.50
Gas Test Fill Professional (Mini+Propane
Hose)
(0054)
GAS Test Fill Professional Kit,
allows the new refillable gas tank or refillable gas bottle installation
to be pressurised up to its full working pressure with LPG from a Calor
Propane bottle. You can then
leak check all the joints from the fillpoint going into and out of the
gas bottle / tank system. and/or appliance joints in vehicles like
Motorhomes, Caravans, etc. NB: you must read the Gasit air-test support
info before ordering!
https://tinyurl.com/gi-airtest
£53.95
AIR Test Fill Mini UK (M)
(0052)
AIR Test Fill Mini UK is for use with UK 'PCL' Bayonet Airlines (F) and
allows the new refillable gas tank or refillable gas bottle installation
to be pressurised up to its full working pressure with air. You can then
leak check all the joints from the fillpoint going into and out of the
gas bottle / tank system. and/or appliance joints in vehicles like
Motorhomes, Caravans, etc. NB: you must read the Gasit air-test support
info before ordering!
https://tinyurl.com/gi-airtest
£15.95
AIR Test Fill Mini EURO (M)
(0053)
AIR Test Fill Mini EURO is for use with EURO Bayonet Airlines (F) and
allows the new refillable gas tank or refillable gas bottle installation
to be pressurised up to its full working pressure with air. You can then
leak check all the joints from the fillpoint going into and out of the
gas bottle / tank system. and/or appliance joints in vehicles like
Motorhomes, Caravans, etc. NB: you must read the Gasit air-test support
info before ordering!
https://tinyurl.com/gi-airtest
£12.95
GAS Grade PTFE Tape
(ACCS-091)
Used on taper threads in particular. Not usually used elsewhere. Be very
careful not to allow it into the path of the gas itself.
Only with
Gasit systems.
£0.95
Spare Part: Std Bottle Gauge
(VB-007)
Replaces an existing gauge display unit, suits
standard 2-valve GAS IT, Gaslow and Alugas. NB: This will only work if
your bottle already had a level gauge fitted with this type of gauge
assembly But see also this
help sheet
re gauge function
£11.95
Gasit BBQ Point Kit 8mm
(GI-0099)
In-locker kit for tee-ing off from 8mm pipe on low pressure side of the
regulator. Comprises 0.5m thermoplastic gas pipe 8mm, fittings kit &
p-clips, 8mm compression tee, BBQ tap with mounting frame and 8mm quick
release nozzle out. Once installed just add your BBQ hose to the nozzle
and then snap-in to connect, easy.
£35.95
Gasit BBQ Point Kit 10 to 8mm
(GI-0100)
In-locker kit for tee-ing off from 10mm pipe on low pressure side of the
regulator. Comprises 0.5m thermoplastic gas pipe 8mm, fittings kit &
p-clips, 10mm compression tee, BBQ tap with mounting frame and 8mm quick
release nozzle out. Once installed just add your BBQ hose to the nozzle
and then snap-in to connect, easy.
£44.95
External plug-in BBQ Point Bullfinch
White
(ACCS-016)
with
snap-in & auto on/off. Gas/BBQ point, ideal for supplying LPG barbecues,
cooking appliances, patio heaters, LPG gennies etc from the unit’s existing
regulated supply.
Complete with plug-in connector and fixing screws. 105x110x85. 8mm
feed. 60mm cutter. Priced for supply with systems.
£44.95
SPARE PLUG-IN
FOR THE ABOVE
Spare Plug-in Tail Connector (ACCS-016P)
For use with the above BBQ point, ideal to run a second appliance -
Generator & BBQ e.g.
£12.95
8mm Tee with Isolation
Tap on Branch
(ACCS-180)
All in one branch-off for a BBQ point or other appliance taken off the
8mm low pressure gas piping within the vehicle.
£32.95
1-Way Tap in-line Manifold 8mm
Compression
(ACCS-009)
Vital isolation valve for adding appliances or BBQ and providing
emergency / maintenance off.
£9.95
Consumables
just
below are posted out separately but include postage when ordered with Gasit
N28630 Sikaflex 512 White 300ml for
mastic gun
The Outdoor PU
Adhesive/sealant for motorhomes
£15.95
N28632 Sikaflex 221 White 300ml for
mastic gun
The Indoor PU Adhesive/sealant for motorhome use.
Suitable for kitchen use in contact with food.
£14.95
Sika Pro Mk5 Mastic Gun for 300ml tubes e.g.
Ideal for application of the sealants here.
£14.95
AAG193
Sikaflex 221 Grey 300ml for
mastic gun.
The Indoor PU Adhesive/sealant for motorhome use.
Suitable for kitchen use in contact with food.
£14.95
AAG195
Sikaflex 221 Black 300ml for mastic gun.
The Indoor PU Adhesive/sealant for motorhome use.
Suitable for kitchen use in contact with food.
£14.95
Upgrade
amounts - if / as instructed.
000000
Special Item / Carriage Surcharge / Deposit
£0.50
000000
Special Item / Carriage Surcharge / Deposit
£0.95
000000
Special Item / Carriage Surcharge / Deposit
£1.00
000000
Special Item / Carriage Surcharge / Deposit
£2.00
000000
Special Item / Carriage Surcharge / Deposit
£3.00
000000
Special Item / Carriage Surcharge / Deposit
£5.00
000000
Special Item / Carriage Surcharge / Deposit
£10.00
GAS-IT Fittings for Imports / Foreign
Fittings
e.g. German fittings conversion plus UK adapters to fit ACME fill-points with internal thread.
NB: While many items are Gaslow compatible we must treat the two product
ranges separately, so if you want to mix them please create two
orders yourself, one for Gaslow products one for Gasit products. * All Gasit
is delivered direct from their warehouse so orders here must be for Gasit
products only *
French-Italian - Acme Adapter
(Imports)
(FA-012) One piece fill adaptor - add to any fixed ACME fillpoint (Germany, Belgium, Republic of Ireland, Luxembourg, USA) to
convert to 'Euro dish' / 'Clawgun' adapter as used in France, Italy,
Austria, Poland, Romania, Greece etc. Simply screws by hand onto the
existing ACME fill point and is then unscrewed to get back to the
original 'German' fill.
£17.95
UK Bayonet - Acme Adapter (Imports)
(FA-006) One piece fill adaptor - add to any fixed ACME fillpoint (Germany, Belgium, Republic of Ireland, Luxembourg, USA) to
convert to 'UK Bayonet' adapter as used in UK and parts of the
Netherlands. Simply screws by hand onto the
existing ACME fill point and unscrewed to get back to the original
'German' fill point.
£29.95
UK Bayonet - Acme Internal Adapter
(Imports)
Hymer / VW e.g: Simpler long adaptor for ACME
with
INTERNAL THREAD as picture.
(FA-009) (Some Germany, Belgium, Republic of Ireland, Lux, USA) to
convert to 'UK Bayonet' for UK and some
Netherlands. Simply screws by hand into the
existing ACME and unscrews to get back to the original
'German' / 'American' fill point. Also has an internal fillpoint thread
itself so takes the normal French adapter as an extra add-on too.
NB: You must have an existing internal threaded Acme
inlet to
use this!
£10.95
German Adapters Below:
Although using the same 21.8LH thread, German (and some other European)
bottles have a different seal system with an internal washer acting on
that protruding pipe. The
adapters below convert to & from that system to the UK 21.8LH Nut with
the washer seal located in the pigtail. You must use these adapters where appropriate to
ensure a gas tight seal.
New: German 21.8LH to UK 21.8LH Adapter (i.e. UK-Pigtail onto German bottle) (0077)
GAS IT designed adapter allows UK standard 21.8LH pigtails and
regulators to be fitted and used on German / European 21.8LH gas bottle
and gas tank outlet valves (incl Alugas bottles). Goes onto a German bottle
and then takes a UK 21.8LH Nut hose or regulator. Germans use an
inside
seal, not a washer on pigtail / regulator as here in the
UK.
£17.95
New: UK 21.8LH to German 21.8LH Adapter (i.e. German-Pigtail onto Gas-it Refillable) (0076)
GAS IT designed adapter allows German 21.8LH pigtails and
regulators to be fitted and used on UK 21.8LH bottles & tanks (Gasit &
Gaslow). Goes onto the UK refillable and then takes the German 21.8LH
pigtail. Germans use an inside
seal, not a washer on pigtail / regulator as here in the
UK.
£17.95
German fit Pigtail
(PT-013)
450mm high pressure rubber gas hose for use with German bottles
in 2004-on style systems. German 21.8LH fitting one end and W20-reg the other
(also
suits Alugas).
£19.95
Express & Export Delivery Options
- for most products, click 'Add to cart' if required.
Option - £8.00
Express/ Rush Delivery Supplement -
add - Carrier will be overnight but despatch
could still be delayed by up to 2 days
Option - £16.00
Gas-it System Scotland Delivery Supplement
Postcodes AB, DD, FK, IV, KW, PA, PH
For Gas-it order only, pls don't mix with other brands
Also covers oddments to Europe - like adapters
Option - £35.00
Scottish Islands : Isle of Wight : Isle of Man :
Northern Ireland, Ireland (Eire). Single system estimate.
For Gas-it order only, pls don't mix with other brands
Option - £55.00
Scottish Islands : Isle of Wight : Isle of Man :
Northern Ireland, Ireland (Eire). Twin system estimate.
For Gas-it order only, pls don't mix with other brands
Option
Gas-it System to
Europe/Ireland, normally for Max 25-30Kg and 1.5m long. - add- *
Europe
/ offshore service not available on Gas-it Bottles
Gas-it order only, pls don't mix with other brands
* You must add Europe carriage for deliveries outside
the UK.
Our normal charge added automatically during checkout covers
standard UK mainland delivery.
NB: While many items are Gaslow compatible we must treat the two product
ranges separately, so if you want to mix them please create two
orders yourself, one for Gaslow products one for Gasit products. * All Gasit
is delivered direct from their warehouse so orders here must be for Gasit
products only *
You can modify quantities, view carriage, or delete items in the shopping basket at any time. Then when convenient checkout on a secure server
All are normally stock items but in any case order with confidence
because we will always inform quickly of any unexpected delay and will
always offer a no quibble refund option if unexpectedly out of stock.
GAS IT:
We're extremely pleased
to offer the amazing Gasit range of refillable LPG systems. Gas-it's
amazing value has already turned it into one of our best sellers!
Why us? We're
motorhomers ourselves and long term refillable users all round
Europe for many years - we really do understand motorhomers' gas needs and problems
here and abroad! Why refillables?
For delightfully easy gas management especially abroad where several
different fitting types are used on exchange bottles.
But also say goodbye to all that one-empty-for-exchange nonsense and
also goodbye to lugging heavy gas bottles around.
How are they different? Mostly
by having a second completely separate hose system to effect the fill;
also a different output connector for pigtails - '21.8LH Nut'
or '109 Nut'.
To
get started we're offering the most popular products largely based
on kits but can already supply anything from the GAS IT range. Do email us if you have specific needs
not listed here and/or
if you want help designing a system - we'll ask for photos of what you
have installed now to be sure we can advise properly. We do have lots of
experience here - more than 20 years motorhoming and nearly 15 years
using refillables / Autogas all round the UK / Ireland and Europe plus
many years selling our 
both have clip-on* readout Gauges, JIC inlet and
21.8LH outlets as many will be familiar with on Gaslow & Caratank
products - in fact they are fully compatible with those systems you can
even mix and match if you wish (however these are all direct ship items
so please create separate Gasit & Gaslow orders). The usual safety elements are in place
including 80% content control and hoses fully approved to the EU & UK
E67.01 regulation - and you even get a free gas leak detection spray
with twin systems to
assist with installation and ongoing maintenance. 
New:
Portable Direct Fill - EASYFILL© GAS IT bottles. Recently
announced changes to approved practice in UK, Quote: 'New guidance and User
Information Sheets* (UIS026 & UIS037) published by UKLPG and
sections within the Petrol Filling Stations RED Guide now clearly state
that a privately owned transportable gas bottles with OPD and on bottle
fill point can be removed from the vehicle to be filled via a directly
mounted gas bottle fill point'. 'Our EASYFILL© GAS IT
bottles are
purposely designed, and approved, to TPED and Pi requirements to be
removed from your vehicle for portable and freestanding refilling
directly at an Autogas station and/or Forecourt in the UK via the pre-installed German manufactured
bottle Overfill Prevention Device (OPD) and
direct mounted fill point' - so when you release the Autogas fill gun it
shuts off instantly and all your cheaply bought gas is left inside your
GAS IT bottle as you and the garage would wish! The Easyfill-Sky
versions have a
filler pointing skywards while Easyfill-Horizon have a fill point angled
for filling from the side. (* NB: none of this applies when abroad these
are UK docs). Will this work with my existing UK Propane regulator or
Pigtail? - Yes! With our POL adapter, included free, you can
connect your existing Calor Propane on-bottle reg or a Propane pigtail
to the bottle+adapter, easy! 
The Gasit PLUS 4-Hole Cylinders have built in top gauges - like the new Gaslow
but a lot larger and easier to read - and with a whole host of other features too, including an excess flow valve
and liquid phase separator so fully useable on the move without the need
for Secumotion type hoses. There are other in-motion issues though, e.g.
any gas exhaust needs to have been designed for in-motion use, our own
in-motion heating exhausts out through the roof. For most of us it is the improved
accuracy gauge and the possibility of adding a remote readout that appeals.
Do note though: a) The more accurate gauge is a little awkward to read once
installed in a cupboard, I use a mirror & torch & reading glasses on
mine! b) The remote readout has to be wired into and around the
'van, easy as OEM but not so east as a retro-fit. Plus cylinder top pic
above right, most of our customers unbolt the collar for easier access. 
Fill Hoses & Pigtails: Gas-it prefer the rubber 'hydraulic' style fill hoses for
their systems and they are "fully Approved to E67.01 which is a EU and
UK regulation".
Fill lengths of 0.5m to 3.0m are available in one piece and longer with a
coupler or through-bulkhead coupler. Refillables companies use exactly the same
'JIC' fitting
system for filling so Gaslow and Gas-it fill hoses are fully
interchangeable, as are the 21.8LH-NUT output hoses or 'pigtails'. If you want
stainless braided on a Gasit system there's no problem mixing the two
brands but you do have to create separate Gasit & Gaslow orders for
logistical reasons. In pigtails the 21.8LH screw-on Nut for refillables is also called Butane Nut (as used on the UK Butane
dumpy bottles) and as 109 Nut in UK. You can reuse screw-in POL pigtails and POL
regulators by adding our 21.8LH to POL Adapter found in the shopping
listings below. Info: Fill hoses (only) use a metal-to-metal seal, no washers are
supplied or needed for these on either brand.
Damaged regulators and the possibly
contaminated system beyond them can be very expensive to fix - so be
warned! The new DGI accessory fill filters below
could well be a viable alternative to that adding protection from grit
ingress too - albeit they are a lot less convenient in use than the
in-line installed items as the RH example pictured right. A footnote on stainless steel hoses: originally
sold to minimise regulator oiling they have an internal plastic tube
in place of the rubber and some
in the industry have concerns over the fire resistance of these. 
Gasit
customer feedback may give you a different view: "I've had one of these
(Gasit) filters on my gas bottle inside my heater for about a month and
i thought i'd look inside it today to see how what it was like inside.
There is lots of staining from the gas and already there's a smelly oil
in the body of the metal filter. i've only ever used Calor gas for my
gas bottles and this rubbish was clearly going in to the heater or
regulator (before). Glad i bought this filter!" This
does fit well alongside Truma's statement that "
LPG
before it can get into your tank/cylinder. Available just as a Filter
unit or as a GDI Filter + UK Bayonet Extension set (pictured left), or as part
of a Euro-UK Adapter kit (pictured right). For use the filter is first fitted
(spannered*) onto the back of any of the various standard adapters
including the UK Bayonet so a great addition to almost any refillables kit.
Plainly if you have a fixed UK fill point you will need another loose UK
Bayonet, as in some kits, to assemble to the filter, that assembly is
then screwed onto the fixed point in exactly the same way that a 'foreign'
adapter would be.
Changing-over:
On newer systems with an on-wall regulator and with refillable bottles
fixed in place for up to 15 years it is madness to repeatedly make and
break gas-tight joints just to swap from empty to full and back again.
It is far better to leave the joints alone and to have a change-over.
These range from fully automatic units with indicators like the set pictured right right, down to a cheap W20 T-piece with NR Valves
for
permanent connection of two pigtails to the regulator, so then just turn the bottles
on and off at their taps as needed.
New:
For pre-2004 systems: A) a POL-out wall mounted
Manifold-T pictured right, this allows two cylinders to be connected via
modern pigtails but connected to the motorhome via an existing
bull-nosed propane regulator i.e. an older pre-2004 style on-bottle
type. The inlets accept standard Propane or Refillable
cylinder pigtails or even a mix of the two - handy where a backup Calor is kept
alongside a refillable for example. Two x W20 male-in to POL Propane
female-out, wall mounting plate and importantly for mixed or 'Calor'
systems it comes with NRVs - a quality item. Change-over is manual at the bottles, just
turn them on & off individually. B) an on-wall 37mbar Cavagna
Regulator that will accept a change-over head, see regs listings far
below. C) we can now offer a POL to
German converter so usable on older imports too! 
Kits:
Gasit 11kg Refillable Kits and 6kg single and twin refillable kits are available both as standard items and also made
up with variations to suit you and/or your vehicle - all very handy
because there can be different requirements on both input and output
sides. GAS IT offer a wider range of fill points than Gaslow - including
the removable type and a different style of in-locker kit - so there
are some extra choices there. Also a wide range of hose length options on both
input and output so even more choice. On the output side there are a surprising number of
differences across vehicles; pre/post 2004 regulators on-bottle or
on-wall; Secumotion type; imports like Triomatic, even 50mbar type; 21.8LH or
UK POL bottle
connections; Horizontal or Vertical regulators installed high or fairly
low; the list goes on. Send us pictures of what you have installed now
along with likely filler locations and we'll
advise on what you need to connect up easily & legally & safely plus any
options you might have. Pictures are by far the best route and prevent
any common misunderstandings that can occur on the telephone! Example Twin in-Locker kit
pictured right.
You can add an angled hose to get a vertical or 45 degree exit too. Unsecured
'dancing' hoses
may leak in time, so do route and secure/clip them
properly! 2) W20 T-piece right, the simplest manual change-over that eliminates 'spannering'
and works with all/mixed pigtails. It is bonkers to keep breaking a vital
10-year gas-tight joint in a twin or mixed system when you can add this cheap widget and
keep both pigtails permanently connected to the regulator and just
open/close the bottles and change if needed and/or appropriate at the
bottle/Calor end of the pigtail - as
intended! 
Using this system it is also possible to use a single
Truma filter unit.
3) Elbows to turn hoses quickly, three types exist -
21.8LH at the refillable bottle, W20 at the regulator/change-over and JIC at
fillpoints. They are great problem solvers in tight spaces.
4) Through-bulkhead JIC connector, a neat and easily sealable inlet
hose widget to enable a pass-through the gas locker wall with a standard
fill hose attached either side - chafe free. Goes through a 20mm hole
and fits bulkheads up to 15mm thick max. 5) New: German system adapters.
6) For BBQs we recommend an external BBQ point delivering pre-regulated
gas like the Bullfinch but we can also supply the Gasit in-locker kit
with tee, 8/10mm thermoplastic pipe & clips & mountable gas tap with
quick-release nozzle. NB: Both these BBQ accessories fit both refillable
and exchange gas systems by tapping into the already installed low
pressure gas pipes.
This is an area that seems to cause confusion -
there are three types, the 'Remote' pot type, the compact 'Removable'
type (straight example shown left) where all travel adapters are removable including the
supplied UK one and finally the
'Locker' type with supplied bracket & cover. All do exactly the same job
and fit the same hoses, elbows, etc., it is just suitability for
location that determines the choice. The Remote
fill heads come with a round recessed mounting box in black or white
painted similar to Gaslow and these require a 70mm hole (70+86 in
thicker walls), The small neat
version without a recessed box is the 'Removable' fillhead
28-30mm
hole with four 6mm bolt holes around it; these are provided in the
Remote fill box but plainly you need to make these yourself on a
removable head fitted though the vehicle skirt for example, the supplied
plastic cap assembly covers any small mismatch. 
General
Filling
Info: Can I get a cheap refill and where??
Well
no not usually - user refilling of loose bottles is not permitted
as indicated by the sign seen on most Autogas pumps as pictured right. It might be
possible if you can find an LPG depot that will refill for you, at a
suitable price?? Gaslow
list a few UK-only filling points that will refill loose refillable
bottles. The
general rule for user-refilling is only via 'fixed bottle plus
fixed filler head and filling system'.
